Well, assuming you've changed your oil, try disconnecting your battery, then reconnecting it. You'll lose your presets on the radio, but it should work. Otherwise, you may have a bad fuse.
XXXXXXXXXXXXXXXXXXXXX ANSWER XXXXXXXXXXXXXXXXXXXX
On a car with a computer you should NEVER disconnect the battery in an attempt to clear any lights. It will not work as you can not erase the memory. You can possibly fry a computer with the power surge of reconnecting the battery. Press the gas pedal to the floor 3 times in 5 seconds with the key "ON" and the engine off.
Reset button in the fuse box. Look in the owners manual.
There is none.
Chevrolet does not use inertia/reset switches.
Chevrolet does not use inertia/reset switches.
you need a scanner
The instructions on how to reset the brake maintenance light in a Chevrolet Malibu can be found in the owner manual. It can be viewed for free at Chevrolet's official website.
After repair, you reset with a scan tool.
Carefully!!! You will need to pressure bleed the system and it will require a scanner to reset the light.
Turn ignition to auxillary pump gas pedal three times turn ignition off then back on light should be reset. also if you call jiffy lube and tell them they did not reset light they will give you process to reset.
Reset the change oil light on Mazda 3
Why? Just reset it.
turn key to on. press gas pedal three times. turn off key. this resets light. turn key to on. press gas pedal three times. turn off key. this resets light.
The check engine light on a Chevrolet Colorado can be rest by connecting an OBD II code reader to the vehicle's computer . Each of the codes can then be reset which will turn the associated light off.