This must be done in 5 seconds. Turn key on, DO NOT START. Then push the gas pedal all the way down to the floor 3 times being sure to let all the way off each time then turn the key off and then start the engine.
That requires an OBDII engine scanner.
unplug your battery for 15 minutes and it will go off
Chevrolet does not use reset switches.Chevrolet does not use reset switches.
Chevrolet does not use inertia/reset switches.
Chevrolet does not use inertia/reset swtiches.
Chevrolet does not use inertia or reset buttons.
key on engine off press accelerator pedal to the floor five times very rapidly should reset
when you disconnect your battery and reconnect it will reset cumputer
The instructions on how to reset the brake maintenance light in a Chevrolet Malibu can be found in the owner manual. It can be viewed for free at Chevrolet's official website.
After repair, you reset with a scan tool.
Turn the ignition set to on without starting the engine. Press the gas pedal three times in quick succession and watch for battery light to flash three times, when it does, it is reset.
Chevrolet does not use inertia/reset swtiches