0
You gotta turn the key on and press the mode button till trip A shows on the screen. Turn key off, then hold the mode button and turn the key back on (till all the dash lights come on, do not start the engine). Hold the mode button down until all zeros show on the screen. Done!
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
How do you reset the maintenance required light on a 2010 Scion XD?
You will find that info in the owners manual.
How do you Reset Scion airbag light?
how do i reset srs light on scion tc
How do you reset maintenance required light in a 2008 Scion XB?
1. Set your ODO to Trip A 2. Turn off ignition 3. Hold ODO button 4. Turn on ignition 5. Hold ODO button until Maintenance Required light stops flashing
Reset the maintenance required light on 08 Toyota rav 4?
maintenance with engine
How do you reset the Maintenance Required light on a 2005 Scion xa?
t's not a problem, it is merely a reminder light so customers will be prompted to do the required maintenance. Turn the ignition ON Make sure the "ODO" is displayed, not "TRIP" Press and hold the TRIP reset button Turn the key off and back on Hold the reset button until the lines on the ODO display disappear and the ODOMETER reading comes back. answered by Liselle
How do you reset the maintenance required light on a 1992 Dakota 5.2L?
The maintenance light,You will need to take it to a Dodge dealer to reset it. Or get a DBR-2 code scanner.BIG $$$
Reset maintenance required light 92 Dodge Dakota?
aperantly take the light out
How do you reset airbag light?
how do i reset srs light on scion tc
How do you reset maint reqd light on 1992 Plymouth voyager?
The maintenance required light requires a scan tool to be reset.
How do you reset the maintenance reqired light in the 2011 smart key Toyota RAV4?
How do you reset the maintenance required light in the 2011Toyota RAV4 with a smart key starting system
How do you reset the Maintenance Required Warning Light on a 89 Dodge Dakota?
To reset the maintenance required warning light on a 1989 Dodge Dakota, unhook the battery connector cables for 10 minutes. Reconnect them and start the vehicle.
How do you reset the maintenance required light on a 2011 Honda Accord -?
With the engine and ignition off push and hold in the odometer reset button. While holding that button in, turn on the ignition but do not start the engine. After about 5 seconds the light will go off and the maintenance required light will have been reset.
