Turn the ignition key to the ON position (don't start the engine) and pump the accelerator three times within 10 seconds. Turn the key to OFF. That will reset the message.
If your vehicle happens to be a Chevrolet or GMC, turn the ignition to the on position and push the gas pedal to the floor three times within 5 seconds, the oil change light should flash five times...
To reset "change oil" light: 1: Turn ignition key to 'run' (one position before starting engine) 2: Fully depress accelerator pedal 3 times slowly, within 10 seconds. 3: Turn ignition key to 'off'...