Turn the key on but do not start the truck then slowly press the gas pedal to the floor 3 times within 10-30 seconds. Turn the key off then back on...the change oil message should be cleared. (I just did this myself on my truck)
Turn on Ignition - depress gas pedal 3 times- turn off ignition
Key on engine off, press gas pedal to the floor three times, cycle key off and back on.
How do you reset maint read light on 2010 corolla
The oil change light is reset by Key on, engine off. Press the gas pedal to the floor three times. Cycle key off and on.
Turn on Ignition - depress gas pedal 3 times- turn off ignition
You can reset the change oil light on your 2010 Nissan Ultima by going to the oil life display. When the oil life display is illuminated hold in the checkmark button until the oil life goes to 100 percent.
reset service light on 2010 ml 550
coaster bus how do you reset timing belt light 2010
To reset change oil light on Honda sh150i. Have key in off position, hold down the clock change button, while turning the key to on position, continue to hold for 2 sec while change oil light goes off.
Reset the device by debugging it.
Turn ignition on... depress gas pedal to floor three times in ten seconds. Turn ignition off then on. Knock on windshield four times and turn ignition off again.
Turn the key on but do not start the truck then slowly press the gas pedal to the floor 3 times