How do you reset the service light on your L322 Range Rover?

Answer:

Autodiagnos Ltd

St Christopher House, 217 Wellington Road South, Stockport, SK2 6NG, UK

Tel: 0161 209 4470 Fax: 0161 209 4488 Email: info@autodiagnos.com

www.autodiagnos.com

Registered Office: Autodiagnos Ltd, 5 Pullman Court, Great Western Road, Gloucester GL1 3ND Registered No: 3062855

Service light reset - Land Rover

The procedures described below are relevant to the following European specification models:

Model Chassis Model year

Discovery 3 / LR3 L319 2005 to 2006

Range Rover L322 2002 to 2004

Range Rover Sport (not supercharged) L320 2005 to 2006

1) Procedure to check/reset service status - Distance counter

􀂃 Switch ignition OFF

􀂃 Press and Hold left instrument panel reset button, switch ignition ON to position 'I' (accessories)

􀂃 Keep reset button pressed for approximately 5 seconds until the LCD displays 'RESET SIA'. The

distance to service (e.g. 2150 miles) and the service type (e.g. Inspection/oil service) will be

displayed.

􀂃 Has the 'Reset Distance' limit been reached or exceeded?

o NO - Follow instructions in section 2 below

o YES - Follow 'Reset Distance Counter' instructions below

Reset Distance counter procedure

􀂃 Press and hold left instrument reset button for 5 seconds. 'RESET' will begin to flash on the LCD

display.

􀂃 To reset distance the left hand button should be pressed before the 'RESET' message has flashed 5

times

􀂃 The LCD will display 'END SIA'. Switch ignition off

2) Procedure to check/reset service status - Date counter

􀂃 Press left instrument panel reset button once

􀂃 The LCD will display 'RESET SIA' followed by the service due date.

􀂃 Has the 'Reset Date limit been reached or exceeded?

o NO - Press the left instrument button once. The LCD will display 'END SIA' to indicate the

service interval check/reset procedure has been cancelled.

o YES - Follow 'Reset Date Counter' instructions below

Reset Date counter procedure

􀂃 Press and hold left instrument reset button for 5 seconds. 'RESET' will begin to flash on the LCD

display.

􀂃 To reset distance the left hand button should be pressed before the 'RESET' message has flashed 5

times

􀂃 The LCD will display 'END SIA'. Switch ignition off

First answer by ID1364162537. Last edit by ID1364162537. Question popularity: 2 [recommend question].