# Ignition OFF - Hold down RIGHT button & switch ignition on 'SERVICE NOW' should stay on. 2. With ignition still ON & still holding down RIGHT button turn LEFT button CLOCKWISE > 'SERVICE NOW' will go out. 3. Release all buttons. 4.Turn ignition OFF and your done...
Press and hold button "A" (positioned right of trip recorder display) Switch ignition ON The word "SERVICE" will appear in the trip recorder display Release button "A" Turn button "B" (positioned left of trip recorder display) to the right to reset the display Switch ignition OFF
how do I reset my service engine light on my 1999 ford f150
On my aurora, I just hold in the reset button.............
How do you reset service indicator message for A 1999 Mercedes Benz ML320 after service A or B is completed?
Turn key to position 1. Make sure main odometer and trip odometer are displayed. Press up or down arrows on steering wheel to show FSS (flex service) on display. Turn key to on position and press trip odometer reset (R) for 2 seconds. Display will ask if you want to reset FSS. Confirm by holding reset until display shows FSS reset.
I doubt if it can be reset. Probably a sensor fault if it is reading incorrectly.
i believe that you are asking how to change the miles til service back to 3000 so it will stop beeping when you start the car. just make sure you are on the screen on the display that has the miles til service and hold reset until it goes to 3000
how do you remove a 1999 vw passat radio
The service light is a little spanner which stays illuminated on main display on start up of the engine, this is a simple reset if home servicing and no diagnostic plug in from dealer necessary.Procedure to Reset Peugeot Service Light as follows:1. Switch the Ignition Off2. Press and hold the trip meter (mileage reset) button on the dash3. Now switch the ignition to the ON position4. Keep the button pressed for 10 seconds5. The display will read '0' and the service symbol will extinguish. Works on most models of manufacturer, for example.Peugeot106(1999 on)Peugeot 206 (1998 on)Peugeot306(1996 on)Peugeot307(1996 on)Peugeot406(1998 on)Peugeot607(2000 on)Peugeot806(1999 on)Peugeot Expert (1999 on)Peugeot 807 (2002 on)Peugeot Partner (1999 on)Peugeot Boxer (2002 on)
According to "Haynes Service and Repair Manual" is it Fuse 33 (F33/15Amp).
VOLKSWAGEN PASSAT 1998-ON 5x112
Button A = Button on the right of the centre display on the consoleButton B = Button on the left of the centre display on the console------Passat from 2001 onwards:Ignition off.Press and hold down button "A"Ignition on.The word "SERVICE" will appear in the trip computer displayTurn button "B" to the right to reset the displayTurn Ignition off.Passat year 2000:Press and hold button "A"Ignition OnThe word "SERVICE" will appearRelease button "A"Turn button "B" to right until display is clearedPassat from 1996-1999:Oil Service Reset:Press and hold button "A"Ignition OnRelease Button "A"Letters "OIL" or "OEL" will displayModels with digital clock : turn button "B" to right until "---" is displayedModels with analogue clock : pull out button "B" until "---" is displyedINSP service Reset:Press and Hold Button "A"Ignition ONRelease Button "A"Press and release button "A"INSP should be displayedModels with digital clock : turn button "B" to right until "---" is displayedModels with analogue clock : pull out button "B" until "---" is displayed