0
How do you reset the timing belt light on a 2001 Toyota Landcruiser 1hz?
Wiki User
∙ 15y ago
with ignition turned on, using the trip switch , change the display to ODO, and then turn the ignition OFF
While pressing the trip switch,turn the ignition switch ON and hold for five seconds
Release the trip switch,then press the switch again within five seconds.The digital display should change to T- BELT MODE. Each press of the switch then should change the reset time by 10,000km increments. After setting the klms hold the trip switch ON for more than five seconds then release the switch. Check that the display has now changed back to ODO and that now the warning has gone off when the engine is started . Hope this is helpful
THIS IS THE CORRECT ANSWER ABOVE BUT I CAN ELLABORATE:
= Timing Belt Warning Indicator Reset Procedure = For LandCruiser UZJ100, HZJ105 and HDJ100 ---- 1. T-BELT MODE DISPLAY
a) With ignition turned ON, using the trip switch (select/reset button) change the display to ODO, and turn the ignition OFF
b) While pressing the trip switch, turn the ignition switch ON and hold it for 5 seconds.
c) Release the trip switch, then press the switch again within 5 seconds.
d) The digital display should change to T-belt mode. The initial display "15" (0,000km) is displayed (ie. 150,000km).
2. REWRITING REPLACEMENT VALUES
While in the T-Belt mode, each press of the trip switch will change the displayed value by 10,000km increments. Once " 20 " (200,000km) is reached the display reverts back to " 1 " (10,000km) again. Remember, this setting is the number of kilometres to be travelled before the light comes on next, and once reset this counter will start from zero.
I believe the timing belt interval for all the 100 series engine variants is 150,000km, but this should be checked against each different markets servicing recommendation. This being the case, you shouldn't need to change from the default setting of "15".
Obviously for the US, the ODO is in miles, and I guess the T-Belt warning would be set in 10,000 mile intervals.
3. T-BELT WARNING RESET COMPLETION
a) After setting the replacement setting value, hold the trip switch ON for more than 5 seconds then release the switch.
b) Check that the display has now changed back to ODO and that the warning light has gone off when the engine is started.
NOTE: If the T-Belt mode is completed, even though the belt replacement has not been performed, the T-Belt warning IS reset.
I hope this proves to be of assistance guys, as usual all care no responsibility
Answer According to my repair manual:
Remove the grommet from the speedometer and turn off the lamp by pushing the warning light reset switch, then replace the grommet. The above is for the older than 2001 models.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How do you reset 1997 landcruiser timing belt light?
I believe that is a dealer only problem.
Does the warning light stay on when the timing belt needs changing on a 1996 Toyota landcruiser?
the warning lights comes on indicating that the timing belt needs to be changed. even once the timing belt is changed, the warning light will stay on until is it reset.
How do you reset the timing belt light on a Toyota vigo 2006 model?
how to reset the vigo timing belt warning light
How do you reset 1990 Toyota Camry check engine light?
how to reset oil timing on 1990 toyota
How do you reset timing belt light model 2010 toyota coaster bus?
coaster bus how do you reset timing belt light 2010
How do you reset the timing belt light on 2002 hilux d4d model no kdn165 2494cc engine?
how to reset toyota kdn165 timing light
How do you reset the timing belt light on Toyota hi ace?
on 2014 Toyota hiace
How do reset Toyota innova timing belt warning lamb?
The timing belt warning light, on a Toyota Innova, can be reset by removing the timing belt warning light fuse. Leaves the fuse out for 10 seconds and put it back in.
How do you reset the timing belt light on a 93 4.2 landcruiser?
According to the repair manual: Remove the grommet from the speedometer and turn off the lamp by pushing the warning light reset switch, then replace the grommet.
How do you reset timing belt light of 1999 Toyota hiace grandia with analog dash?
The easiest way to reset the timing belt light, on your 1999 Toyota, is to remove the dashboard light. Keep the fuse out for 10 seconds and replace it to that slot.
Reset check engine light 1997 Toyota landcruiser?
You can disconnect the battery for about 30 minutes then reconnect. This may solve the problem. You will need to reset the time etc in the car.
How do you reset timing belt indicator light on Toyota hilux D-4D 2006?
timing belt light hilux 1kd
