Users of FixYa give this method for resetting this light: With the key in press and hold the odometer button. Turn the key to on, and release the odometer button once the fuel light goes out. This gives access to a service menu. Repeatedly press the odometer button until the number displayed reaches 15, then press and hold the button in until the T-Belt light goes out. Remember to also replace the timing belt - it is a very important part, and some engines can be destroyed if the belt breaks in use.
timing belt light hilux 1kd
how to reset toyota kdn165 timing light
see hpoc.co.uk for a post on this very question
There are a couple of ways to reset the timing belt light on a 2008 Toyota Hilux diesel. One way is to unplug the battery for up to five minutes and see if that will reset the light. If not, you can hold the trip meter button down and turn the key, but not start the vehicle. This will reset the light most of the time.
there is a little bung on your dash board beside your trip meter pull out bung and deep in there you will see a little button get a needle and push the button easy as that timing light out
One can take the car to the dealership to find out if there is an outstanding problem and also to turn of the fuel filter light. Most times cars have a light in its a good indicator that there is a serious problem!
Have you purged the fuel filter? Usually it means you have water or something in the fuel. My 94 hilux does it from time to time. The filter on mine is on the passengers side it has a rubber knob on it. There is a butterfly nut underneath. Undo it and pump the rubber knob. It will pump out the water or contaminate from the system.Pump until you get a clean diesel flow from it.
To reset the fuel filter warning light off for the Toyota hilux one must replace the filter that switch the car on and off. They must also click the rest button.
how do you reset the digital miter timing belt light on Isuzu 2.8 turbo diesel
If your timing belt light is on in your Toyota Land Cruiser then you need to take it to get serviced. The light could be warning you about a problem with the belt.
The easiest way to reset the timing belt indicator lamp in your Toyota automobile is to remove the fuse for the indicator lamp. Keep the fuse out for approximately 30 seconds. Put the fuse back in and the indicator light should be off.
no