If you cannot log onto the hub through your browser (or control software) then there is usually a small hole in the back where you can use a thin paperclip to push the reset button.
However just by unplugging its power - wait one minute - and plug back in would do it as well.
A wireless hub is a place where Internet can be acquired through wireless channels, like WiFi. An example of a wireless hub would be a restaurant that offers free WiFi to its customers. The hub is the WiFi antenna.
Press Settings, then General -> Network -> Wifi. Select the wireless hub by name, and enter the wireless password (if there is any).
Unfortunately, a hub isn't a router so you won't be able to get wireless Internet from one.
Well it depends on what Wireless modem you have with Verzion Wireless you have a reset button so all i can tell you now is to check for a reset button
30 feet
wireless
if your wireless router has lan ports then the answer is yes.
In most cases you can.
Wireless routers only need to be reset if they receive too many connections, such as from torrents.
Without a hub / router, you can not access the internet. So the benefits in having a hub will be accessing the internet through 2 ways - wireless and wired.
YES, the first thing to understand is that there is a vast difference in the two. HUB and ROUTERS (Hub is a Traffic Cop, that is able to focus on the job at hand and perform exactly as needed with traffic. A router is merely a traffic light that performs exactly as commanded.) Now any wireless hub or router will connect any wireless device, but to share a high speed intenet (Cable or DSL)you MUST have a HUB. Hubs are designed to receive a broadband carrier and wireless traffic. But if you having difficulty connecting most likely your wireless devices are not finding or detecting the wireless router or hub. Winxp is unusual, but the best fail safe here is install software for all devices and SHUTDOWN everything! Broadband modems, wireless hub/router and all connected computers. Disconnect power to Broadband modems and wireless hub/router. Wait 10-15 seconds then Plug in power to Braodband modem first. Then wait about 5 seconds and plug in wireless hub/router. Once bioth devices are light up normally turn on all connected computers. The computers should detect the system and self route to compleation.
You need to buy a wireless router and connect it to the modem.