0
Turn the dial to the omega symbol.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
What is the cause if a multitester is in the ohms position but the meter pointer cannot be set to zero when the test leads are shorted and the ohms adjust control is turned?
check the batteries
How do you set up digital freeview satellite in Germany?
Check it on GoFreview.com, you might find it there !
How do you test a camshaft position sensor on a ford focus?
Using a Digital Multimeter set to 2k,..the resistance should be 200 to 900 ohms ifnot replace,
How do you check a 6v regulater delco?
That depends on what you're trying to check, exactly. If you want exact voltage, you'll need either an analog or digital multimeter, unless you have the high end Snap-On test light which displays voltage on an LCD display. If you're trying to test resistance, you'll need a digital multimeter, as well. You'd remove the regulator, set the DMM on the ohms setting, and place the probes in contact with the regulator input and output.
How do you check if a diode is serviceable?
use a vomm set to infinite resistance if you have reistance one way and not the other way. diode is good (must be isolated from circuit) if no resistance both directions diode D.O.A.
Can I connect a timer to my digital camera so that I can also be in the picture?
Many of the newer digital camera's come with built in timer's so you can set it and join in! Check your manual that comes with the camera for specific instructions.
Were will resistance 3 be set?
Resistance 3 will be set somewhere within the United States of America during the 1950s.
How do you get digital channels with your digital tv?
Go to the "set up menu" and click on SCAN DIGITAL CHANNELS.
When testing for current draw your digital multimeter should be set on?
When testing the current draw your digital multimeter should be set on the current.
How do you set Arnette Digital AR00203?
fnirhegbihgfhfddkjhg
What set the stage for vietnamese resistance againts the french?
WW2 set the stage
How do you check motor resistance?
If your fan works on some of the speeds, but not others the most likely culprit is the resistor set. These are cheap and I wouldn't recommend spending a lot of time troubleshooting them.
