The "WR 165" is not the model number; it only indicates that the watch is water resistant to 165 ft.
I have the Armitron 45/6967 (model number found on the back) and there are no instructions anywhere online. Even if you have a different watch maybe this will help.
Abridged instructions for the Armitron 45/6967:
A /set adj\ B
C \mode EL/ D (light)
To set the Alarm/ Time/ Date:
1) Alarm: Push and hold C- the first mode is to set the alarm.
A switches between hours and minutes indicated by the numbers flashing.
B advances the hours and minutes.
2) Time & Date: Push and hold C (to set alarm) push C again to set the time & date indicated by the seconds flashing. What is flashing is what will be adjusted.
*This mode starts with seconds, Pushing A cycles through Time and Date.
Pushing A (number of times) takes you to:
(1) minutes, (2) hours, (3) month, (4) date, (5) day of the week.
Pushing A again will take you back to the start with seconds so if you miss what you want to adjust just cycle through until you come back around.
B advances whatever is flashing (except seconds, it just zeros it out). If you are in 12-hour mode PM is indicated with a P above the minutes; AM is blank.
To turn on/ off the Alarm and Hourly Chime:
1) Push and hold B- this will tell you what time the Alarm is currently set to go off. *Note this is not how to set the alarm, see above
While still holding B push A to turn on/ off the alarm and hourly chime.
What is on is indicated on the bottom of the display:
----> AL<- Chime off * Alarm on
---->CH AL<- Chime on * Alarm on
---->CH <- Chime on * Alarm off
----> <- Chime off * Alarm off
YOU HAVE TO STAND UP . ON ONE LEG. ( TIME DOESNT EXIST ) YOU MAKE A 360 TURN . CLOSE YOUR EYES. YOU TAKE A DEEP BREATH. AND YOU THINK WHAT TIME YOU DESIRE TO BE ON CLOCK. ETIMOP
depends on the watch.
instructions for cardinal 3108 digital watch
The best way to reset an Armitron 40-8249 is to take it to a watchwaker or jeweler who knows the equipment. Armitron does have a detailed manual available on their website, however.
In order to watch digital channels one needs to first purchase a digital set top receiver box. These are relatively cheap nowadays and won't set you back more than $50 for a standard unit.
Without knowing the make and model no-one can tell you how to do it.
You pull out the crown once to change the date, twice the change the time
It's actually pretty simple! There should be 4 buttons on your digital watch otherwise it may not work: Mode, Light, Start/Stop, Set. 1st. Click SET 2nd. Click both SET & MODE If it doesn't work that instant, try clicking both SET & MODE a few more times. And it should work the other way around, to change your digital watch from 12 hour to 24 hour.
There are a few uses for a digital tuner, it can be used when needing to tune a guitar to ensure each string is in the correct key or there is a digital tuner which can be used for your TV to receive a signal that enables you to watch various channels through a digital TV set.
An analog watch has a display which comprises two or three hands which go around in circular motion. The main alternative is a digital watch in which the display comprises a set of numbers which are used to tell the time.
no you can watch them over and over like a normal DVD
I Didn't know how to change the time on my digital silicone jelly watch, but now i know how to, take it into the shop where you got it, and without being nervous, just ask them to set it for you, that's what i did ;) I LOVE MATT CARDLE!!