Ignition timing should be set to 6 deg BTDC, this is done with a timing light. Connect the power leads of you're timing light to the battery and put the pickup clamp over #1 plug wire. Disconnect the vacuum line on the vacuum advance and plug the line so it does not create a vacuum leak. Start the engine and shine the light on the crank pulley to see the timing mark. It should be pointed at 6 deg BTDC.
See the attached links on how to install and check you're timing belt.
Kyrasis6
Mazdatruckin.com
All mazda b series with a b2000 or b2200 are a NON interference engine.So in short if your timing belt broke it will not damage the engine.
Stock ignition timing at idle is 6 deg BTDC +/- 1 deg. I like to set mine for about 7 or 8 deg BTDC. Kyrasis6 Mazdatruckin.com
most likely a belt, mine has the belt
how to set engine timing for mazda t3500
1,3,4,2 Number one is at timing cover closest to the distributor.
Hoo I set the correct timing on a 1993 mazda protege
No
where is the fuel pump on a 89 Mazda b2200
where is the EGR valve on a 1989 mazda b2200
Who is a valve calibration for mazda b2200 1988
How do you set cam timing of a mazda 626 l 1.8?
The 1992 Mazda B2200 will hold close to 17 gallons of gas. The 1992 Mazda B2200 is a four-cylinder vehicle.