The base or the solvent or the stain itself can be used to even out the color. Use a soft cloth and dampen it with the any of the three and rub it into the heavily stained area until you get the color even out.
It's difficult to even out the color once you've already stained it. Too keep your stain color even, use a "sanding sealer" first to seal the wood surface and apply your stain over the sealer.
Try to determine what the color is and get stain just slightly lighter. Newer wood is often softer than it used to be so it absorbs more color. Apply 1 coat and compare it to the old. You can put another coat on or let it sit longer to make it darker. The type of finish will affect it also. Depending on what you use, it will darken the finished board just a little bit.
Sand the area when the overlap occurred. Then get a rag damp with the stain you are using. Make several passes over the area you just sanded, feathering in the stain as you get to the edges of where you sanded. You should avoid getting fresh stain on the surface that still has the dried stain on it.
You get a can of the stain you want and experiment on a few pieces of the same wood till you get the colour you want. Don't put on too much at first, you can always darken it later.
You can stain balsa wood.
Wood stain is abosorbed into the wood, so the wood takes on the color of the stain. This is why the features of the wood are still visible, unlike with paint.
It could look blotchy depending on the type of wood and if it's a colored stain.
what is best stain to use on monkeypod for clear look show the true wood
I agree with Charles. I would also sand the piece of wood with the stain a bit then apply the darker stain.
You can stain balsa wood.
Wood stain is abosorbed into the wood, so the wood takes on the color of the stain. This is why the features of the wood are still visible, unlike with paint.
Wood stain is for sealing and emphasising the natural colour of wood
Pine is the hardest wood to stain becuase it absorbs the stain to erratically. anonymous@oola.com
It could look blotchy depending on the type of wood and if it's a colored stain.
Wood is wood.
what is best stain to use on monkeypod for clear look show the true wood
There are various ways and methods of removing the solid wood stain from the pressure treated woods. The methods includes sanding and refinishing it and striping the stain and replacing it.
I agree with Charles. I would also sand the piece of wood with the stain a bit then apply the darker stain.
I am also looking for enterpris oil penitrating wood stain
A stain is used to color the wood while a varnish is a topcoat used to protect the wood.
Wood varies in density.