To get to the parking light assembly, it's easiest to remove the headlight assembly. Open the hood. There are two metal bars just above the headlight assembly. Turn them towards you to unlock, then pull straight up. Remove the headlight assembly by pulling it towards you. Remove the bulbs (be careful not to touch the bulbs as grease from your fingers can make them blow prematurely). Set the headlight assembly aside. The parking light assembly has a hook on the outer edge, just behind the corner light. Farther to the center is another gray hook with a release. Press the release towards the corner light while pulling slightly on the assembly. Once released, swivel the light outwards to release the corner hook. Remove the light sockets and you're finished.
be more specific the break sensor?parking break light?
The fuse controls for the cargo light on a 2001 Chevy Silverado are located in the fuse panel just beside the brake pedal. It is labeled on the cover and can be replaced by the owner.
what does it mean if my brake light is blinking on and off when its pushed down in my 1999 Chevy silverado
a 2003 Chevy silverado taillight bulb uses a 3157
If you mean a low fuel light, then NO.
It should if it is the round body style such as 2001 or 2002.
Remove the headlight assembly and you will have access to the parking light bulb.
Most likely the fuse is blown for the dome light on the Silverado if the light doesn't come on.
A Silverado C1500 is a 2WD light truck, K1500 is a 4WD light truck. Please clarify what you mean about the r and the v as I am unfamiliar with that coding.
no it doesnt
problem with the abs, get it fixed
Yes but, if the light is flashing no.