Make sure the unit is unplugged, then used two butter knives to insert in the front part of the lid...about 2 inches in from the outside corners to raise the lid.
ANS 2 - Don't risk making your wife mad by ruining the butter knives ! -try two small pry bars or even flat screwdrivers.
These machines do not have belts. Lid switch is your most probable culprit. Though there are other parts that will stop it from spinning.
Try Kenmore.com
There is a clear hose attached to the water level control of the washer. The other end of the hose is attached underneath the washer. The hose isn't attached with any hose clamps so if the washer rocks from a uneven load it could come disconnected and on the next load the water fills up and never stops. Just disconnect the water and electric and the drain and turn the washer on its side look for the hose and reattach it to the hookup underneath-- I just fixed mine, I thought I was going to be buying a new washer but this one still works great now! Hope this helps- Jesse
the following discussion is useful for answering this question: http://ths.gardenweb.com/forums/load/laundry/msg0700323110578.html You can easily and cheaply get rid of the smell by using a product called smelly washer, go to smellywasher.com
No luck searching. Calculating the volume comes up with 3.2 cubic feet, but that doesn't account for the volume taken up by the agitator, so 3 cubic feet is probably about right.
The Kenmore 70 series washer and dryers date back to the 1970s. They were sturdy machines. The Kenmore 70 series washer that had the model number 11026632503 was a popular choice.
Depending on the Series.. Most are 3.2 Cu ft
agitator not working
sears parts dept... www.sears.com in the parts section...or bring a model number to sears parts center and order.
2.8
Yes.
13.7 ~ the guy was just here and they are going to replace mine... He told me how big so I can"buy up"...
Kenmore made several washers over the years in the 80 series. The average size for capacity was 3.2 cubic feet of load space.
Kenmore model 110.9259600 washer capacity
Take the cover off where the controls are at and there is a pressure switch with a hose connected to it. It should be round, about 2- 2 1/2 inches in diameter and maybe an inch thick. If your washer has a load size adjustment, it is what the knob attaches to.
Approximately 7.37 cu. ft. for the dryer and 3.64 cu. ft. for the washer.
What is cubic foot capacity of Kenmore washer moodel 110.42822 201