Answers.com > Wiki Answers > Categories > Cars & Vehicles > Auto Parts and Repairs > How do you test a back pressure transducer?

How do you test a back pressure transducer?

In: Auto Parts and Repairs [Edit categories]

Answer:

Answer

make sure you have vaccum to the transducer, i believe there will be 2 hoses coming from the throttle body. make sure that the metal line that connects to the bottom of the transducer is not clogged with carbon. if you have vaccum and that line is clear, take the hose that goes to the egr vsv solenoid off the transducer and rev the engine up. if it is good you will have vaccum through the transducer, if its bad no vaccum will be there.

<(")

First answer by ID1152533573. Last edit by Jamie9000000. Contributor trust: 0 [recommend contributor ]. Question popularity: 42 [recommend question].

[report abuse]

Can you answer these Auto Parts and Repairs questions?

	Why reducer for auto paint?	Answer it!
	What is best auto paint to use?	Answer it!
	What are nice names for gear oils?	Answer it!
	What are the uses of pneumatics in automobile machine?	Answer it!
	What countries makes radios?	Answer it!

Relevant answers:

How do you convert a hydro test pressure to a pneumatic test pressure?
Design pressure multiply by 1.1 equal pneumatic test pressure.Design pressure multiply by 1.5 equal Hydrotest PressureNote: Design Pressure is different from Operating pressure. Design Pressure is...
What is a pressure test for?
A coolant pressure test is used to detect a leak on the coolant system.
What is back pressure?
Pressure going in the opposite direction in which it should be going.
What is Back to back test of a transformer?
Back to back testing of a transformer can be better explained if you check the diagram in the resource area.
Does a resonator produce back pressure?
depending on its design, a resonator will produce anywhere from almost no back pressure, to a mild amount.