That could vary greatly depending on what model of Toshiba TV you have. The link below is to Toshiba's web site where you can get product support as well as replacement owner's manuals, etc.
cannot pay dvds in color when using the toshiba 2852db
You usually select the video channel input via the remote control or the menu button on the front of the set.
not sure if this helps but it was all i could findStep 1Turn on your Sony Bravia LCD TV and tune in to a broadcast that supports closed captioning.Step 2Locate the "CC" button on your remote control. This button's location varies depending on the Bravia model, but it is clearly labeled "CC."Step 3Point the remote at the Bravia TV and press the "CC" button until you see "On" or "On When Muting" displayed on the screen. "On" always displays subtitles, but "On When Muting" only displays subtitles when you press the "Mute" button.Menu SettingsStep 1Press the "Menu" button on your remote control.Step 2Press the navigational arrows to highlight "Setup Settings" and press the center button to select it.Step 3Select "Closed Captioning (CC)."Step 4Select either "On" or "On When Muting" to turn on subtitles.Step 5Press the "Menu" button to exit the menu.
With the 2004 Monte Carlo radio off, turn the ignition to run. Press and hold the radio tune disp button to enter the menu. Scroll down to tire mon setting. Press prev button. Now press tune disp. A chime will ring to indicate the reset. Scroll to exit and leave the menu.
DISH remotes have a feature called Sat Auto-Tune. When SAT is pressed, it will change the TV to whatever channel is programmed into the remote. This can help make sure you are on the right channel in case it gets changed. The steps below will help you disable the auto-tune. 1.) Press and hold the TV mode button until all the mode buttons light up. 2.) Press the STAR (*) button and the TV button will light up. 3.) Enter 00 on the number pad. 4.) Press the POUND (#) button and TV should flash three times. 5.) Press the SAT button and auto-tune will be disabled. To enable auto-tune simply replace the 00 with the channel required to view DISH Network programming.
Try the link and see if your units owner's manual is listed. Link to it and read the instructions to get the scoop. Note: If you do not have the original remote and are attempting to program a universal replacement to work on your Symphonic set, you may be unsuccessful. Symphonic has a number of sets with "oddball" remote codes that are not included in universal replacements. There are 800 numbers to the companies that make the universals, and they can tell you if their unit will work on a given make and model number. You may also be able to find this out online at the remote control manufacturer's site. Good luck.
Turn the radio on / press and hold the CLK button / press the right side of the "SEEK" button to increase the hours or press the left side of the "SEEK' button to decrease the hours / press the right side of the "TUNE" or "TUNE DISCS" button to increase the minutes, or press the left side of the "TUNE" or "TUNE DISCS" button to decrease the minutes When the time is set - release the "CLK" button
Press and hold the " CLK " button To adjust the hours use the " SEEK " button To adjust the minutes use the " TUNE or TUNE DISC " button
tune
If it's an S-Series, hold down the RCL button and push the tune up button to set the hour and the tune down button to set the minutes.
Turn the radio on / press and hold the CLK button / press the right side of the "SEEK" button to increase the hours or press the left side of the "SEEK' button to decrease the hours / press the right side of the "TUNE" or "TUNE DISCS" button to increase the minutes, or press the left side of the "TUNE" or "TUNE DISCS" button to decrease the minutes When the time is set - release the "CLK" button If this doesn't work.....sry
Push and hold the time button until the hour starts flashing. Let go of the time button and turn the tune/audio button to adjust the hour. Then push the tune/audio button, the minute will start flashing. Adjust it the same way as the hour then push tune/audio button to save settings.