You can weld stainless steel to stainless steel using various welding methods such as TIG welding and MIG welding. However, it is best to get a professional to do the job. And understand that stainless steel does not weld very successfully under any circumstances - it will almost always, inevitably, break right next to the weld.
To glue 2 pieces of stainless steel first degrease them totally to make certain the surfaces will hold glue. The best glues for this are J B Weld, Araldite and LePage Extreme.
Yep, you can weld steel to stainless and you can weld stainless to steel. You can use steel or stainless welding rod in either case but the steel or steel welding rod will of course rust.
carefully
309
You can use the 308 or 316.
stainless steel contains chromium. chromium gives off toxic fumes when heated.
yes
No, I can't.
The three ways you would weld stainless steel are; 1. laser 2. friction 3. TIG Only TIG should be considered for nonproduction welding.
inconel
The most common types of rods used for welding stainless steel are 308, 309, and 316. 308 rods are best for welding 304 stainless steel, while 309 rods are recommended for welding 309 stainless steel. 316 rods are suitable for welding 316 stainless steel and are also good for general-purpose welding of higher-grade stainless steels.
IN SAW WHY SLAG OCCURS?
Yes, it is possible to weld stainless steel to steel using stainless filler rod, but you will run into a few problems: the 2 materials have different molten temps, so to make a consistent weld puddle will hard, the grain structure of the 2 materials will be different, so it is almost guaranteed to have a lot of stress and want to crack, and if you got past those to, the fact the "pure" stainless steel was molten with regular steel, they will mix and eventually rust, since the properties of the steel will have transfered to the stainless.