The lock has to be open, turn the lock to the back side, flip the lever on the bottom up and to the left, set the new combo, push the lever on the back to the right and your done.
I have a brinks comiination lock # M9606494.3 and it looks like it has accidentally been reset when locked by sliding the switch on the back and now it will not open.
hold reset and type the newcode!
The changing of a Brinks lock combination depends on the model that you have. Most actually have a reset button that you hold down for 30 seconds to a minute.
Call this number: 1-800-562-5625. The manufacturer is Hampton Products. Your lock has a 100% warranty. Their customer service department will be able to help you out with any problems that you have with your Brinks lock.
You can reset it by pushing down in the opposite side, as if you were closing it then changing combos. This way does not work i dont know where this guy got this from but dont try it.
Lock smith,thats your best choice,since theres no way to contact brinks people.....
Open the lock. Turn the hasp 180 degrees and push down. Set your new combination and pull hasp up and you're done.
My brinks locked in the open position. What do I need to do to get it fixed
Turn Shackle 180°Press DownHold DownTurn Shackle 90°Set New CombinationTurn Shackle BackThen Pullup
You can't
In order to reset the code, you will need to contact Brinks. The company will send you a key and combination replacement.
To open a Brinks lock you first have to set the lock on zero. Next you turn it clockwise four complete turns, then do it once more stopping on the first number of the combination. Then turn the dial counter clockwise for two turns, do it once more and stop on the second number, turn the dial clockwise twice stopping on the third number of the combination, finally turn counter clockwise to the fourth number. The lock should then open.
i want to reset combination lock with new number while the padlock is locked