Two pairs of Infrared LEDs are used as motion sensor detector. The first one is wired to emit LED and the second is wired to transmit a signal when it receives an infrared input. this infrared is reflected back to the receiving LED and then the signal is produced. This signal can be used to open sliding doors, turn on a light or set off an alarm.
yes you can disable it by covering the motion detector. remember the detector works with heat and if is cover no signal will be register only a ligth switch will over rite the sensor if you turn the ligth on is going to stay on all ways is not turning of that's y you can disable it
the sensor in the side of the differential that has the electrical plug on it that's what works the locker light on the dash. when you lock it in that sensor is pulled over by the ring on the side of the locker and when that ring is fully pushed over it changes the light from flashing, to on solid. but be careful if you take that sensor out you can't put it back in without pulling the gears or when you put it back it in it will stay locked all the time i found out the hard way.
newtons law of motion
Gasntools lpg gas detector works by monitoring different gas levels in the air. These devices are generally battery operated and used for safety. Once they detect a higher than normal concentration of gas in the air, they warn people in the location through a series of really hard to miss audible beeps.
CCD Sensor (in a digital camera) = Retina
yes you can disable it by covering the motion detector. remember the detector works with heat and if is cover no signal will be register only a ligth switch will over rite the sensor if you turn the ligth on is going to stay on all ways is not turning of that's y you can disable it
A door sensor works in a very straightforward manner. It has presence or motion sensors which will activate the door when they detect motion.
deends do you mean any motion sensor? for either one it is xbox360 it detects your movement and moves the motion sensor to your body
How does a rain detector works
it works by putting on a light
Well I just keep trying wires combos till it works with speaker and mic wires and it hasn't hurt any thing.
Because it is day time and the light will only switch on at night? A lot of solar lights have a photo sensor, light sensor, that prevents it from using up energy when it is light out. You can cover up the sensor and it will turn on.
i think it detect the voltage left by the battery
The Iphone is fundementally used by a touchscreen and a main button to quit the current app Application) and go back to the main menu of the device. It also has a motion sensor, this can register whether it should be landscape or portrait. The motion sensor can be used to shake the device this works welll with some apps.
how sound sensor work
Probably a sensor or a chip. Have the dealer find out if there is actually a problem with the airbag. If not, either have the sensor fixed, or use my method--black duct tape over the light. Tacky, but works with a budget.
Possibilities 1) low oil level 2) faulty oil level sensor 3) electrical short (or break) anywhere between the sensor and light There's a saying about warning lights. All they do is let you know the light works.