If having DC and AC is required then a PWM pulse width modulator is required to chop the DC to make AC
The type of power supply being used (AC or DC) should match the power requirements of the device it will be supplying power to.
DC 12V power supply can convert 110/220V AC power source to 12V DC.
Almost all digital electronics use a AC to DC power supply. Digital electronics cannot handle AC. all electronics device having battery powered are using DC power supply http://www.wzmicro.com
Variable DC power supply is: Variable - you can adjust it DC - direct current, electrons (electricity) flows in only one direction power supply - power supply Together, it's an adjustable one-way power supply Hope you find this useful...
diodes conduct electricity in only one direction but as ac change direction in each of its cycle diodes can only conduct half of its cycle which will give u a pulsating dc. but if dc is mixed with ac and if it can put whole of its cycle in positive direction diode can conduct ac. so diodes are usually used to produce dc from ac.
A laptop runs on DC. Either from the battery, or the external power supply, which converts AC power to DC.
dc power supply
Radios use DC power supplies to operate. If a radio is powered from a mains AC supply, a power supply circuit will convert the AC supply to DC. Therefore, a radio may have both a DC and an AC power input but ultimately, the internal circuitry will always use DC.
The type of power supply being used (AC or DC) should match the power requirements of the device it will be supplying power to.
DC 12V power supply can convert 110/220V AC power source to 12V DC.
You can plug an AC computer into a DC plug only if you also have an inverter to transform the DC power into the AC power that the computer power supply expects.
The power supply in most cars is DC. The alternator may produce AC power, but it is then run through a rectifier, providing DC power.
in our home most of the electrical appliances can work only on ac supply e.g. tubelights, fan, refrigeratorsand so on.else we can also say that dc supply is costlier then ac for the same amount of power.
A fluorescent light fixture is designed to operate on an AC voltage supply. To have the fixture operate off of a DC supply a power inverter would have to be installed. The power inverter would then change the DC to AC for the fixture to operate. These power inverters are reasonably priced these days and can be bought at most DIY stores.
It filters ac to pure dc
Transformers don't work with DC supplies - they only work on AC.
Almost all digital electronics use a AC to DC power supply. Digital electronics cannot handle AC. all electronics device having battery powered are using DC power supply http://www.wzmicro.com