Honestly the best way is to call a few contractors and ask them what they charge for estimates, they do it for a living and most of them will do it for little or nothing, even if you want to install it yourself, If you buy the unit through them it will probably save you some money and they can still make a few bucks. Or you could have them install the unit after they size it.
that would depend on the size of the blast furnace.
The size of the furnace depends on the square footage of the house you are heating.
1200 foot propane furnace what size do i need
Read the tag on your furnace for the input/output rating. American Standard and all other manufacturers make more than one size furnace.
67,500 BTU electric furnace
form_title= Outdoor Wood Furnace form_header= Stay warm with an outdoor wood furnace. What is your budget for a furnace?*= _ [50] What size furnace do you need?*= _ [50] Where will the furnace be installed?*= _ [50]
1.furnace is smaller than kiln in size. 2.melting takes place in furnace but no melting takes place in furnace.
It could have any size heating furnace, the two are unrelated except for the size blower used in the furnace to support the 3 ton cooling system. But the fact remains you can get a 3 ton blower in 50,000 btu furnace, a 100,00 btu furnace and anything in between.
I furnace was installed when the house was built in the 60's. The furnace has a wire basket, which I have to by the filter, cut to size and replace. My question can I use a regular air filtr for my furnace.
Usually a 3 ton - 70,000btu furnace.
Meet with your installer to determine the capacity of your new furnace. The furnace capacity should be matched with the size of the house. You want to get a furnace that heats a house without overheating the home. Because your furnace will be newer, it will take less energy to heat your home.
over 1.5 metres i would say over 1.5 metres i would say