answersLogoWhite

0


Best Answer

Most likely made by a robot machine. IE: more better it is maybe 30 feet of small copper or aluminum tubing wound in a back and forth coil pattern to fit the required area in the freezer. Metal fins may be attached to help move the cold into the freezer as air is blown over the coil.

User Avatar

Wiki User

16y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

6y ago

The continuous movement of water molecules can lead some molecules at the surface to escape in the atmosphere as a gas. And this is possible at any temperature.

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How evaporator in a refrigerator is made?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How many types of refrigerator evaporator are there?

over 10,000 refigerators


Is the coil tubing located behind or underneath a refrigerator is called what?

The coil.


What is a suction line on an Air Conditioner?

The suction line connects the evaporator outlet and the compressor intlet. Low pressure refrigerator vapour is drawn from the evaporator to the compressor through this line.


How do you clean refrigerator evaporator coils?

Use a coil cleaning brush. You should clean your coils once per month with this brush to keep your refrigerator running efficiently. These can be purchased at www.appliancepartspros.com.


Can you give me a tecnical description of the refrigerator?

In short, a refrigerator is a heat pump, thus the heat is pumped from the inside compartment of the refrigerator and released outside. A refrigerator consist of three active parts, a compressor, condenser and a evaporator, the compressor is pumping the refrigerant that is in a vapor form to a higher pressure so that it can change to a liquid form, but because of the high temperature generated in the compression stage and the friction of the gas through the tubes, it is not possible to liquefy until its cooled down. That is the purpose of the condenser, it is made up of a long metal tube that is coiled and covered with a heat sink to help get rid of the heat, that is the black plate at the back of the refrigerator, the liquid refrigerant is then passed through a dryer/filter to remove any sediments and possible moisture from the refrigerant then through a thin copper tube that is called a capillary tube, to the evaporator, that is the plate at the inside back of the refrigerator, in the older type single door refrigerators it is the freezing compartment at the top.Because of the much lower pressure in the evaporator the liquid refrigerant immediately start to evaporate back to a vapor form, taking the heat out of the refrigerator inside compartment and returned to the compressor for recycling. The temperature of the refrigerator is controlled by switching the compressor on and off by means of a thermostat, where the sensor of the thermostat is connected to the evaporator. At the highest point of the superheat (superheat is the difference in temperature between the inlet and outlet side of the evaporator).


What are components parts of refrigeration?

There are four main parts of refrigerator. A compressor A condenser A Metering Device(capillary tube) An Evaporator


What wrong when evaporator and condenser fans runs but compressor clicks trying to start on refrigerator?

It's sounds like your low on freon.


What is causing my refrigerator to leak?

There are a few reasons why your refrigerator may be leaking:Blocked evaporator drain (for draining away defrosted ice)Leaking water filter headLeaking water tankDamaged or cracked water lines


Why causes a refrigerator to leak?

There are a few reasons why your refrigerator may be leaking:Blocked evaporator drain (for draining away defrosted ice)Leaking water filter headLeaking water tankDamaged or cracked water lines


What is the function of the evaporator in a refrigeration or air-conditioning unit?

A refrigerator works by evaporating the coolant inside the refrigerator thereby absorbing heat. The evaporated coolant is pumped outside of the refrigerator and compressed to make it liquefy and give up its heat then returned to be evaporated again.


What are typical evaporator tubes made of?

Copper


Why do Refrigerator evaporator coils leak?

The Refrigerator evaporator coil has many forces working upon it from a wide swing of temperature and pressure and vibrations that is caused. Then there is the ice that builds up on the coil between defrost cycles that produces some of the forces that are on the coil. To that add electrolyses of the different metal that are uses in the coil and the corrosive chemical bath that comes from the area and products being refrigerated. The refrigerator evaporator coil have a lot of silver soldered 90 degree union fitting that the forces work on. Than there is the design of the standard refrigerator evaporator coil. The coil sets in the drain pan and drips condensate into the drain pan. A long with the condensate comes some of the dirt and lent that collects on the evaporator fins and if not maintained it will plug the fins and than plug the drain pan. And fill the coil with condensate then more ice. When you really look at the refrigeration evaporation coil you wonder why they don't leak more. I am not even going to talk about the guys that defrost refrigeration evaporator coils with a ice picks.