How go change stop lamp in cirrus 1996?

In: Chrysler Cirrus

[Edit]

Answer

from inside the trunk. remove the black plastic "thumb screws" holding on the trunk carpet over the taillight housing. (counter clockwise) the bulb sockets will be exposed. turn them counter clockwise to remove. they are very very tight. re-install after replacing the bulb by turning clockwise.

NOTE: these things are so hard to re-tighten that you will think you're going to break it. i took my car to the shop to see why they wouldnt work after i changed the bulbs. they laughed at me and said that i didnt tighten them enough.

First answer by Mhyatt. Last edit by Mhyatt. Contributor trust: 17 [recommend contributor]. Question popularity: 42 [recommend question]

Research your answer:

Can you answer other questions about Chrysler Cirrus cars?

Why does your automatic transmission grind going into neutral and park but is fine when it is moved into reverse or drive?
Where crankshaft sensor located on a 2000 chrysler cirrus 2.4 litre?
Where is the hazard warning fuse in a 98 chrysler Cirrus?

Answers.com > Wiki Answers > Categories > Cars and Vehicles > American Cars > Chrysler > Chrysler Cirrus > How go change stop lamp in cirrus 1996?