Carpet glue by its nature is extremely sticky as it is made to keep a rug from moving. If you need to get the glue off of a concrete floor you can use a floor grinder. You can also scrape it.
Concrete block is made from Portland Cement, water, sand and aggregate. The aggregate may be in the form of flyash or cinder from burnt coal.
I spoke to the one paint dealer I have confidence in and was told yes I can do exactly that i.e. put a latex (not sure about alkyd) two part epoxy coating over my concrete latex floor paint. First I sanded the surface to get a better bond and my next move is to clean the floor. As a suggestion be sure you have a concrete paint on the floor. If not you could have other problems which I encountered originally i.e. paint not adherring to the concrete in the presence of water. USE ARMORGUARD EPOXY FLOOR COATING, It will last forever, its 100% Solid, No fillers, ODORLESS and NON TOXIC, Its also made with MICROBAN to prevent mold, mildew or algae, look on www.ecosmartepoxysystems.com for more information
There is only one foundation. Whatever the square footage is for the house on the first floor. Is where the foundation is. Its made of mixed concrete that is poured and set to dry before building the house on it. Perhaps you're asking about the different types of foundations a house can be built on? If so, the three most common are... # Slab - This is a solid slab of concrete that, once the house is built, serves as the floor as well. # Crawl space - Short concrete walls are built on concrete footers to elevate the house. # Basement - Large concrete wall built on footers as well. Hope this helps. == There are also monolithic slab foundations and dry stone foundations as well as mixed masonry and mortar, i.e. brick, concrete block.
Concrete- I remember when concrete nails were made of a forged tungsten steel.
Saturn has no solid ground because it is a gas planet, as in, it is made of gas
Man made solid structures are structures that humans have built. Examples of man made solid structures are dams, brick walls and concrete and cement blocks.
Carpet glue by its nature is extremely sticky as it is made to keep a rug from moving. If you need to get the glue off of a concrete floor you can use a floor grinder. You can also scrape it.
One can use Expoxy floor paint on concrete floors. Typically this would be used in a garage but could be applied to other floors made from concrete. One can purchase it from Home Depot.
Concrete forms are devices used to hold concrete in a prescribed shape until it dries. They can be made out of anything strong enough to hold the weight in - many of them are made of plywood, but they've also been made out of steel, aluminum, other pieces of concrete (oil them and the new concrete will just pop out) and even just a hole in the ground.
A brick is a solid block made from baked clay. A cinder block is a hollow block made from concrete
yes they do they don't go all around the world they hit the ground because its made of rain and sun the rain is on the floor that causes it to hit the floor
The type of underlay you need will depend on the type of sub floor or floor you are putting the laminate on is made of. If the sub floor is made of concrete, you would want vapor barrier underlay. If the sub floor is made of wood a standard or premium underlay would used.
Concrete block is made from Portland Cement, water, sand and aggregate. The aggregate may be in the form of flyash or cinder from burnt coal.
The strongest types of garage floor tiles woulld be those made of heavy concrete, Do your best to avoid any thing that is glazed.
I spoke to the one paint dealer I have confidence in and was told yes I can do exactly that i.e. put a latex (not sure about alkyd) two part epoxy coating over my concrete latex floor paint. First I sanded the surface to get a better bond and my next move is to clean the floor. As a suggestion be sure you have a concrete paint on the floor. If not you could have other problems which I encountered originally i.e. paint not adherring to the concrete in the presence of water. USE ARMORGUARD EPOXY FLOOR COATING, It will last forever, its 100% Solid, No fillers, ODORLESS and NON TOXIC, Its also made with MICROBAN to prevent mold, mildew or algae, look on www.ecosmartepoxysystems.com for more information
Concrete, some glass (for the glass ceiling and some side tiles) Brick. It's a very solid building.