Depends on what refrigerator you are interested in. They all have a label somewhere, usually in the refrigerator compartment that lists the current. My refrigerator has a rating of 11.6 Amps. This is not a consistent current, but would be when the compressor is running.
http://michaelbluejay.com/electricity/howmuch.html
A 12 cubic foot refrigerator uses between 10 and 12 amps. The amount is based on the quality and efficiency of the unit. Larger or smaller units use more or less.
How many amps a refrigerator draws depends on what kind of refrigerator it is. The average fridge pulls approximately 120 amps.
Depends on the fridge, location - meaning hot or cold climate, fridge location in the house, how many times the door is opened, and how much stuff is in the fridge.
Depends on the refrigerator. Consult the nameplate or manual.
1.65 Amp
The formula you are looking for is Watts = Amps x Volts.
If it uses 60 watts at 115volts then it only uses 0.51amps.
There are zero watts in a small refrigerator. Watts are the produce to amps times volts. Without these values a correct answer can not be given.
Look at the back of your fridge and find the plate that tells you how many amps it needs. Once you have Amps you multiply that number by the Volts coming out of your plug (usually 120v) and you will get Watts. So once more: Amps x Volts = Watts
Probably about 450 watts. Since the primary use of power in a refrigerator is for a motor the watts it uses are less than the amps that pass through it. <<>> Assuming that the refrigerator uses 120 volts for a supply voltage, then W = A x V. 4.5 x 120 = 540 watts
The formula you are looking for is Watts = Amps x Volts.
If it uses 60 watts at 115volts then it only uses 0.51amps.
There are zero watts in a small refrigerator. Watts are the produce to amps times volts. Without these values a correct answer can not be given.
1 AMP
2,4789
How many Amps is the fridge pulling? Multiply the Amps by the 120V circuit you're plugging into and you'll get your Watts.
Look at the back of your fridge and find the plate that tells you how many amps it needs. Once you have Amps you multiply that number by the Volts coming out of your plug (usually 120v) and you will get Watts. So once more: Amps x Volts = Watts
Watts is determined by multiplying amps (found on tag with serial number or on data plate on compressor) by volts (example 115 volts times 9 amps= 1035 watts)
Probably about 450 watts. Since the primary use of power in a refrigerator is for a motor the watts it uses are less than the amps that pass through it. <<>> Assuming that the refrigerator uses 120 volts for a supply voltage, then W = A x V. 4.5 x 120 = 540 watts
quite adequate
Kitchen refrigerators use 50-100 watts for about five minutes per hour, so 10 watts or less on average.
The formula for amperage is I = W/E. Amps = Watts/Volts. As you can see there are two values missing from the question.