Nothing over 35 ft./lbs.
Should be at the side of transmission with a vacuum line attached to it
The 1998 Chevrolet 2500 pickup truck has a Freon capacity of 5.5 pounds. You should never overfill the Freon in your cooling system.
You should never add transmission fluid to a Chevrolet 350 engine. You can add transmission fluid to the transmission through the transmission dipstick holder.
14 volts
The transmission modulator valve, On your 2006 Chevrolet Monte Carlo, is located on the top of the transmission. The valve should be labeled as such.
should be the 700R4
Are you asking about the vacume modulator for the distributor? That is on the distribiter, you will see a hose on it or wher hose should be. If ou are wanting vacume modulator for the automatic transmition it should be on passenger side of transmission toward the back.
v8 should be 18436572
I have read that the cast iron case added 150 pounds to the Powerglide transmission, and I have also read that the aluminum Powerglide weighs about 95 pounds, complete. I have moved an aluminum Powerglide by hand, and that sounds about right. Based upon these two statements, the cast Iron Powerglide should weigh about 245 pounds...
13.9 to 14.3 volts no lower and no higher.
There are numerous solenoids inside the transmission. Whatever the problem should be left to a specialist.
there is a fill plug on the side of the transmission towards the top if its not there then you have to add it while you build it but it should be there