14 inches equals one pound of natural gas pressure
The answer should be approximately 55.54 inches fir water column to equal 2 psi of gas pressure
6.358 ounces per square inch
60
The average is about 20,000 BTU's per pound at standard temperature and pressure.
20,141 BTUs in one pound of natty.
An inch is a unit of length. A pound is a unit of mass. The two units are therefore incompatible.
20141 btus
This question has not been answered yet.
12psi
About 2 1 pound per square inch = 2.0362... inches of mercury
12.01 psi
26" = 1psi
20 pounds per sq/in
The average is about 20,000 BTU's per pound at standard temperature and pressure.
100 pounds over 100 sq inches = 1 pound per square inch pressure
Every 2.3077 feet of water in a column increases the water pressure at the bottom of the column by 1 pound per square inch.A 39 foot column of water with a pressure of 120 psi at the base will have a pressure exerted on its top surface of 103.1 psi.39 ft/ 2.3077 ft/1 psi = 16.9 psi ; 120 psi -16.9 psi = 103.1 psievery meter of water in a column increases the pressure at the base of the column by 0.1 kg./ sq. cm (or 1 kilopascal)A 12 meter column of water exerts a pressure at its base of 12 kPa. (or 1.2 kg/sq. cm)
Pressure is Force divided by Area. There are many units commonly used to measure pressure, such as pound-force per square inch (psi) for tyre inflation, Bar (bar) for atmospheric air pressure, meters of water column for bath pressurizers or taps, atmosphere (atm) for underwater pressure etc.. en.wikipedia.org/wiki/Pressure
the answer is 50 pounds.
The "p" in "psi" is pounds. If you are asking what weight would produce a pressure of 560 pounds per square inch, then it depends on what area that weight is on. A 560 pound weight on an area of 1 square inch would produce a pressure of 560 psi A 1120 pound weight on an area of 2 square inches would also produce a pressure of 560 psi.
A British pound coin is 22.5 millimetres in diameter (0.89 inches) and is 3.15 millimetres thick (0.124 inches).