Shingles vary in dimensions, and sometimes there are specific bundles of shingles made for the sole purpose of ridge coverage. If you are using the house shingles for ridge, take the length of ridge to be covered, divided by the exposure of the shingle to determine the number of ridge pieces needed. Normally you will get three pieces out of one full shingle. Once you determine the number of full shingles, find out how many shingles are in a bundle and purchase the smallest bundle of shingles necessary to complete the job.
54.
4
26 bundles should be about right.
The best roof cleaning on the sunshine coast
If there is only one set of shingles on the roof, cover over it. If two, remove the old and then apply the new.
3 3/4 squares.
Two squares.
A call to your insurance company describing why the shingles were lost will answer your question.
general rule is 3 bundles of shingles cover an area 10 ft by 10 ft (known as a square).
3 bundles to a square and 100 sq. ft. in a square, so 3 times 16 equals 48. Depending on how much roof edge and peak add a couple bundles for starter strip and the cap.
How much area would 15 bundles of shingles cover. Standard duty shingles use 3 bundles for every 100 square feet so 15 bundles would cover 500 square feet.
A square is 10x10 but now you need to know how many bundles it takes to do a square and that I'm not sure about