The wattage depends on the type and capacity of the fridge and will vary. The wattage should be found on a label fastened to the fridge.
What you have to do is find out how many amps the refrigerator is drawing, it should be on the nameplate. Use this formula Watts = Amps x Volts. You already know the voltage multiply it by the amps and you will have your answer.
A refrigerator will use anywhere from 300 watts to 750 watts, it all depends on the type. Sub Zero refrigerators use 2 compressor's, so will use more.
All refrigerators require a dedicated circuit due to the Locked Rotor Amps, or LRA, this is the amp draw used to start which can be many times more than the RLA or Run Load Amps, thus despite only drawing say 750 watts, the start up will draw many times more, thus you are not to run two refrigerator's off of of a single 20 amp outlet.
The wattage depends on the type and capacity of the fridge and will vary. The wattage should be found on a label fastened to the fridge.
500-1000 watts, depends on the usage of the freezer.
Take a look on the label on the back of it.
Hooked up a kill-o watt meter for 24 hrs and it says 2240 watts used.
500 - 1000 watts
about 500 - 1000
50 - 60 watts Mine uses 500 watts, but only for about two minutes each hour.
Kitchen refrigerators use 50-100 watts for about five minutes per hour, so 10 watts or less on average.
There are zero watts in a small refrigerator. Watts are the produce to amps times volts. Without these values a correct answer can not be given.
To convert amperage to watts, you need to know the voltage, power factor, and the number of phases that you are working with. For a residential refrigerator this is single phase, an industrial refrigerator could be three phase.
The formula you are looking for is Watts = Amps x Volts.
50 - 60 watts Mine uses 500 watts, but only for about two minutes each hour.
2100 watts to run the refrigerator
On average, a Frigidaire or refrigerator uses around 600 watts. This is assuming that the fridge is an average to large size, and not a tiny fridge that would use less power.
Kitchen refrigerators use 50-100 watts for about five minutes per hour, so 10 watts or less on average.
There are zero watts in a small refrigerator. Watts are the produce to amps times volts. Without these values a correct answer can not be given.
To convert amperage to watts, you need to know the voltage, power factor, and the number of phases that you are working with. For a residential refrigerator this is single phase, an industrial refrigerator could be three phase.
The formula you are looking for is Watts = Amps x Volts.
There are usually around 600 watts of power in use in the average sized refrigerator. In a smaller under the counter or over the counter model of fridge, this wattage will be much smaller.
Probably about 450 watts. Since the primary use of power in a refrigerator is for a motor the watts it uses are less than the amps that pass through it. <<>> Assuming that the refrigerator uses 120 volts for a supply voltage, then W = A x V. 4.5 x 120 = 540 watts
1500
The fridge consumes the watts. My fridge is a normal one, it consumes 500 watts for 2 minutes every hour.
189 watts