400 Kwh per year (1996 - 120 liters)
The formula you are looking for is Watts = Amps x Volts.
There are zero watts in a small refrigerator. Watts are the produce to amps times volts. Without these values a correct answer can not be given.
Probably about 450 watts. Since the primary use of power in a refrigerator is for a motor the watts it uses are less than the amps that pass through it. <<>> Assuming that the refrigerator uses 120 volts for a supply voltage, then W = A x V. 4.5 x 120 = 540 watts
Kitchen refrigerators use 50-100 watts for about five minutes per hour, so 10 watts or less on average.
50 - 60 watts Mine uses 500 watts, but only for about two minutes each hour.
The formula you are looking for is Watts = Amps x Volts.
There are zero watts in a small refrigerator. Watts are the produce to amps times volts. Without these values a correct answer can not be given.
Probably about 450 watts. Since the primary use of power in a refrigerator is for a motor the watts it uses are less than the amps that pass through it. <<>> Assuming that the refrigerator uses 120 volts for a supply voltage, then W = A x V. 4.5 x 120 = 540 watts
Kitchen refrigerators use 50-100 watts for about five minutes per hour, so 10 watts or less on average.
50 - 60 watts Mine uses 500 watts, but only for about two minutes each hour.
Depends on your type of refrigerator since different models use different amounts of electricity.
If it uses 60 watts at 115volts then it only uses 0.51amps.
On average, a Frigidaire or refrigerator uses around 600 watts. This is assuming that the fridge is an average to large size, and not a tiny fridge that would use less power.
Watts is determined by multiplying amps (found on tag with serial number or on data plate on compressor) by volts (example 115 volts times 9 amps= 1035 watts)
The equation to use to find wattage is W = A x V. Watts are equal to the amperage times the voltage. Look on the nameplate of the unit to find the true amperage and voltage needed to operate the refrigerator.
I estimated 1100 - 9AMPS -running, not sure what the surge startup would be.
Look at the back of your fridge and find the plate that tells you how many amps it needs. Once you have Amps you multiply that number by the Volts coming out of your plug (usually 120v) and you will get Watts. So once more: Amps x Volts = Watts