That depends on the voltage you use. If there are 120 volts, the power equals voltage times amperage. 120 volts times 15 amps = 1800 watts. Cheers ebs
It depends on the rating of the fuse.
The maximum is 15 x 120 watts, 1800 watts.
The NEC does not limit the receptacles in a residents. Industrial it is limited to 180 watts each.
Use the correct fuse and nothing else.
Most branch circuits in kitchens are either 15 or 20 amp. if in doubt use the lower (15) amp fuse.
A 15 amp switch can safely handle up to 1400 resistive watts.
The maximum is 15 x 120 watts, 1800 watts.
15 is the amp pf the cigarette lighter fuse in Astra envoy.
The NEC does not limit the receptacles in a residents. Industrial it is limited to 180 watts each.
Use the correct fuse and nothing else.
15 amp fuse marked courtsy 15 amp fuse marked courtsy
The 13 amp fuse with blow at the lower rate to the 15 amp fuse. And At 15 amp the motor is normally more powerful - check the wattage used in both
No, you could overload the wiring and start a fire.
20 amp body fuse 20 amp body fuse #15 on the fuse block 25 amp body feed fuse
fuse number 1 is 10 amp fuse 2 is 25 amp fuse 3is 25 amp fuse 4 is a spare fuse 5 is 10 amp fuse 6 is a spare fuse 7 is 20 amp fuse 8 is 25 amp fuse 9 is 20 amp fuse 10 is 5 amp fuse 11 is 5 amp fuse 12 is a spare fuse 13 is 5 amp fuse 14 is 15 amp
The purpose of a fuse it to protect the wire that goes to the load. A 15 amp fuse protects a #14 gauge wire. A 20 amp fuse protects a #12 gauge wire. To answer your question if the wire size is #12 coming from the 15 amp fuse now then it can be upped to 20 amp fuse. If it isn't then you are taking the risk of overloading the #14 wire with a 20 amp fuse. This can lead to insulation failure of the #14 wire, overheating with the possible outcome of a fire breaking out somewhere in the circuit.
Most branch circuits in kitchens are either 15 or 20 amp. if in doubt use the lower (15) amp fuse.
15 AMP