Watts = volts x amps x power factor
Power Factor is 1 for resistive loads and decreases for other loads like motors.
Maximum watts would be 12 x 220
watts = volts * amps--> Amps = watts/ volts therefore; 2000/220= 9.09 amps
Watts/volts = amps3000 / 220 = 13.6363 Approximately.
The formula you are looking for is I = W/E. Amps = Watts/Volts.
The formula you are looking for is I = W/E. Amps = Watts/Volts.
The equation that you are looking for is I = W/E. Amps = Watts / Volts.
watts = volts * amps--> Amps = watts/ volts therefore; 2000/220= 9.09 amps
Watts/volts = amps3000 / 220 = 13.6363 Approximately.
The formula you are looking for is I = W/E. Amps = Watts/Volts.
The formula you are looking for is I = W/E. Amps = Watts/Volts.
The equation that you are looking for is I = W/E. Amps = Watts / Volts.
The formula you are looking for is I = W/E. Amps = Watts/Volts.
You cannot convert 2.6 kw to amps with that information only. In order to convert watts to amps, you also need to know either current or voltage. This is because watts is volts times amps, and volts is current times resistance
First you need to find out how many amps the heater draws. Then use this formula: Volts (220) X Amps = Watts Then take: Watts x 3.41214 = Btu/hr
If you are asking about 220 watts, remember Watts equal power, which is Volts times Amps. Amps are used to measure current - how many electrons flow past a certain point per second - so there is no answer to this question. If you meant to ask what current a load of 220 Watts would take if the applied voltage was 110 Volts, the answer is 220 Watts divided by 110 Volts = 2 Amps.
That of course depends on who made the water heater and what model number it is you could always call the manufacturer. Quickest way I know of is to look at the heating elements. They will have a wattage rating. This number is visible when you take the cover or covers off, move aside the insulation and use a flashlite to spy the pesky little rascals.I suggest you shut off the voltage first. My 80 gal has 2 elements of 4500 watts each if I'm not mistaken. All you need to do is multiply the Volts by the Amps and that equals watts
This depends on the voltage ... amps = watts / volts 660 W / 110 V = 6 amps 660 W / 220 V = 3 amps 660 W / 330 KV = 2 mA
Yes! One HP equals 749 watts. W = V . I 220 . 7 = 2.056 In reality, with 7 amps in 220 v you have more than 2 HP. By Nonô - BRAZIL Yes! One HP equals 749 watts. If you have 7 amps on 220 v, as watt = volts . amps, 220 . 7 = 1540 watts 1540 / 7498 = 2.056 HP. You have more than 2 hp. By Nonô - BRAZIL