0
about 400 pounds
I just scrapped out an 18 foot sweetwater/godfrey pontoon boat.
got 390 pounds of aluminum, at $0.40/pound yielded $156.
200 pounds was in the railings and deck braces, 190 in the actual pontoons.
after disassembling, all most of the weight of the boat is in the plywood deck, the rest in the seats/upholstery
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
Does a trailer for a 20 ft Pontoon Boat have to be exactly 20ft how much longer or shorter could it be?
Well let's see....How about 20'? sounds about right.
How fast can pontoon boats go?
There are many different types of pontoon boats, but I assume you're asking about your basic 18' rectangular boat with two or three aluminum pontoons. Most of these boats have 50-100 horsepower engines which will allow them to cruise around 15mph and top out around 20-25 mph.
Estimated weight of 20 ft pontoon boat and trailer?
The trailer is the big variable here, but the my 20' pontoon boat weighs about 1600 pounds with all the furniture on. The trailer will probably weigh about 1600-1800 if it's made of steel, so about 3200 lbs is probably about right.
Pitch size for prop on 50 hp evinrude for 20' pontoon boat?
I have a 12x22 on my 50 hp merc-2010 model , pushing a 20 ft. Toon. Does great.
How is the ride different between a 18' and 20' pontoon boat?
I would find it hard to imagine you could tell the difference, provided they had the same setup.
How many pennies can fit in a aluminum foil boat until it sinks?
it can hold 50 pennies depending on the base of the boat and also depenidng on the sides now if you have a 20 by 20 then may be a 100 or 150 pennies it may hold
How fast does a 50hp Lowe Pontoon boat go?
A 50 HP Johnson on a 20' Lowe Suncruiser goes 18 MPH max. That is at 5000 RPM, the trim at its maximum potential position and a whole lot of gas.
How fast will a 20 hp mercury on a 15 ft aluminum v hull go?
the 20hp Mercury outboard motor runs at the most at 8mph on a good 14ft to 16ft aluminum boat. Mercury.co
How many people will a 20 ft pontoon boat hold?
This depends on the boat itself, length alone is not the determining factor. Every boat should have a specification plate on the right side of the transom (the rear board of the boat that the motor or sterndrive is attached to). This plate gives the model and serial number of the boat. It also included the maximum number of people or maximum weight of people and gear. It is important to respect the max weight for the stability of the boat at all speeds.
I am looking for a 20 quart stock pot, which is better an aluminum or stainless steel?
Stainless steel would last you much longer than aluminum. Aluminum is not as dense as steel, and may not last as long.
How fast can a 20 hp Johnson boat motor go?
My 15 ft. aluminum v-hull does 22 mph with a light load in it. More weight = less speed.
What is the weight of a pontoon tube?
what is the weight only of a 20' tube x 24'' in diameter,,and one more tube of 26'' in diameter x 20'
