Also CFL and LED light bulbs use much less actual wattage than their equivalent wattage.
It is best to look at the datasheet for each individual type of light bulb. They can vary from milliwatts to kilowatts, depending on the purpose the light bulb was intended for.
Depends on the output of the bulb. A 60 watt would naturally use 60 watts. A 100 Watt would use 100 watts, etc.
i need you guys to tell me
They both need electricity to work.
Without the light bulb, we would have to use the sun candles and when the sun is not here, we would have to use candles. Light Bulbs are one of our things that we need to live.
The pronoun that takes the place of the noun 'light' is it, as a subject or an object pronoun.Examples:The light in the stairwell is out. It must need a new bulb. (the pronoun 'it' takes the place of the noun 'light' as the subject of the second sentence)The light in the stairwell is out. I need to find a bulb for it. (the pronoun 'it' takes the place of the noun 'light' as the object of the preposition 'for')
If you add resistance to the circuit the bulb will shine with a fainter light ... the higher the resistance is the fainter it will shine
110 volts is what comes out of an average wall socket in America. A 100-watt bulb would be powered by 110 volts. You need to be more specific in your question to get a good answer. Small can't be measured.
Need more information. Wattage of bulb, voltage of bulb, voltage of battery and wire size of the circuit.
A higher wattage HPS bulb may work with a ballast that is rated for a lower wattage bulb , but may appear to be dim and will not produce the rated light output. It is best to match ballast and bulb accordingly.
The wattage will depend upon the type of bulb and the number of lights on the string. It will tell you on the package what each bulb requires in wattage, so you only need to multiply that by the number of bulbs in the string. so, number of bulbs x wattage requirement for each bulb = wattage requirement.
You would have to check the manual. It may even be embossed on it. The light bulb is usually a standard 100watt. But because there are so many models it may require more or less wattage.
A light bulb is manufactured to operate on a specific voltage. The voltage can be a low as needed and the manufacturer will compute the size of the filament that is needed for a specific wattage. If you are referring to a threshold voltage then that is another question that needs to be asked.
120 volts is a standard voltage in US for normal house hold electric outlet. , So you can buy from 0 watts to 1000 watts for 120Volts socket . However the bulb you want to buy depend on the Lamp holder , rating of the socket and where the holder is installed, how much light you need etc . Check the max Watts rating on your socket or Lamp and determine the correct Wattage bulb to use. No one can tell you what wattage bulb to use with out looking at your socket or Lamp. The formula for Watts = Volts x Amps Check out the low wattage Compact Fluorescent Light Bulbs which will consume very low engergy and save money in a long run http://www.energystar.gov/index.cfm?c=cfls.pr_cfls
You need to look at the bulbs' light-output equivalents rather than voltages. Neither voltage nor wattage is a measure of light output; nearly all household bulbs in North America operate on 120 volts regardless of how much light they produce, and different types of bulbs produce different amounts of light despite having the same wattage rating. Both incandescent and CFL bulbs should be marked with their light output, usually in lumens. Try to pick a CFL whose light output is as close as possible to the incandescent bulb you're replacing.
The typical wattage of a tanning bed bulb is 100W, but you need to check the size of the bed to make sure.
When you want to use a MH bulb in an HPS ballast you must use a conversion bulb. It must be the same wattage as the HPS bulb
To increase the current you either need to reduce the resistance of the load or increase the voltage. Typically a higher wattage light bulb will decrease resistance or you could put multiple batteries in series.
Yes, because the "higher" watt energy saver bulb (cfl) is actually a lower watt bulb than a standard (incandescent). Always look at the actual watts, not the 'light equivalent watts'. 11 watt low energy tube = 60 watts of old-fashioned light. More light, less heat!