Hello,
I recently replaced the fog bulbs on a 2000 ES300. I believe it should be the same procedure. I found it necessary to remove the Fog housing to replace the bulbs. First you'll need to get...
Along the rear of the inside of the trunk there are four small bolts which need to be removed. Once removed, you will be able to push out the outer plastic cover holdind the light bulbs and wiring....
I assume that your question relates to the high stop light. From the back seat face the back window. Firmly grab the plastic enclosure and pull it towards you. It might not release very easely, but...
1. Disconnect the wires from the bulb (just pull connecter straight out);2. There's a big rubber seal surrounding the bulb preventing water and dirt to go into the headlamp; pull it out as well, use...