0
With a grease gun, every oil change.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
How often should you grease a truck fixed turntable?
you should grease yours every other month.
Where are the grease fittings?
under the truck
Where is the grease fitting on the ball joints on a 2003 F150 truck?
there is none.....everything should be sealed and greaseless on a stock setup
What grease does one ton GM truck take?
I like to use an EP2 grease, but EP0 will work, as well.
Where is the grease fitting on the ball joints on a 203 F150 truck?
they are greaseless
2004 Chevy truck grease points?
there are no grease points on these trucks. most of the new trucks have sealed steering and suspension components.
How do you clean the mack truck bulldog hood ornament?
Brasso, a clean rag, and some elbow grease.
Does 1987 Comanche jeep truck use clutch grease?
I don't know what you mean by clutch grease, but the clutch master cylinder uses dot 3 brake fluid as a hydraulic.
I am trying to grease my u-joints on my truck but the end of my grease gun does not fit in between the u-joint and the driveshaft to get to the zirk any suggestions?
There is a special needle used for this. It can be bought at a autopart store.
Where are the grease fittings on a 2005 dodge Dakota truck?
The lower ball joints have grease fittings especially if they're aftermarket so you may want to keep those lubricated.
How do you clean paint from a truck bed liner?
Paint thinner, a good brush, and a whole lotta elbow grease.
Where are grease fittings on a 2002 Toyota Tacoma?
there should be around 6 grease zerks located on the driveshaft. at each U-joint and one all the way towards the back near the rear axle. You may have to lift the truck and turn the driveshaft by hand to get to them. (make sure to be on level ground and use all safety precautions). apply the grease specified liberally on the joints as it willl push out the old grease and in with the new. The one towards the back make sure not to over do it.
