First you want to raise the rear end off the ground. Then take a ratchet strap and pull the rear bumper and axle together so it collapses the spring and shock. Now you loosen the two pinch bolts at the very end of the rear axle arm. Take a punch and put through the hole of the eccentric axle housing, turn down to tighten or up to loosen, or roll the rear wheels forward or backwards to do the same thing. Leave at least a 1/4 inch of slack in chain. Now tighten the pinch bolts to 60 ft-lbs, remove ratchet strap, and lower rear end. Check regularly for proper chain slack.
520
it is a 300 polaris explorer
how much oil to put in polaris 300 explorer 4*4 98
On the very bottom between primary & secondary.
4 ml
To remove the started on a Polaris 300 Explorer ATV first open the hood. Locate the started which will be up against the wall near the driver's side and remove the screws. You can now install a new started.
Idon't know about a 1995 Polaris 300 Sportsman, but I have a 2008 Polaris 300 Sportsman and the main particular oil I use for mine is Polaris brand oil. If your not satisfied with my answer, call your Polaris Company.
300
There are three hoses on a Polaris 300 carburetor. The fuel line is the large one. One is a vent hose that goes nowhere, and the oil injector line connects to the small hose connector on the right side, nearest to the air intake. It goes straight out.
How do you adjust carburetor 300 honda fourtrax?
what do you need to know about
A Fram pH 6017A fits the 06 4 x 4 300 Polaris hockey eye