Drain radiator, remove water pump hose, (best If completely removed) reservoir hose, and top hose and both transmission lines. Remove top plate that holds radiator in (keep hold of rubber end caps) doing this first allows the radiator to move a bit aids in next step. Remove bolts that attach A/C core lift up on a/c core to unseat the dowel pins.Radiator should pull out with a little coxing. When installing new radiator be sure to use new fittings put Teflon tape on transmission lines. replace rest in reverse order. Be sure to bleed air out of system by cracking the bleeder on the coolant rail while engine is cold wait for it to start spitting coolant then close it. recheck coolant after engine cools off again and Viola.
how to change third or center brake light on Chevy beretta 95
The temperature sending unit for a 1995 Chevy Beretta is on the front of the engine. It is between the front of the engine and the radiator inlet/outlet.
the beretta and lumina motors are about the same i have a lumina motor in my 95 beretta
How many cylinders?
Go to autozone.com. They have this information on their website.
R12 unless retro fitted then 134A
you need to post your displacement to get the proper procudure.
how to change radiator 1995 jeep grand Cherokee Laredo
Remove bottom plastic cover in center of dash first and then remove other plastic part that the first peace was attached to. (watch for hidden screws)
where is the drain plug on a 99 Chevy lumina where is the radiator drain plug on a 99 Chevy lumina I am not completely sure about the 99 but I drive a 95 lumina and the radiator drain plug is located to the right of the radiator (if you are looking under the hood) and at the bottom of the housing for the radiator. Mine is white in color.
Look under the car on the exhaust near where the pipes merge together. There should be one.
i need a diagram for my 95 Chevy beretta for the 2.2L engine. I'm tryin to replace the timing chain, and i need to know what to take off and what not to take off