First disconnect your batteries then mark all wires on starter so you know where they go on the new starter. Then remove three bolts and bam do this in reverse order and your done!
1. Disconnect battery.2. Jack up vehicle and support w/ jack stands3. Disconnect positive bbattey cable from starter4. Disconnect wire from solenoid5. Remove (2) 15 mm bolts from bottom of starter...
Starter
Removal & Installation
1. Disconnect the negative battery cable.
2. Raise and safely support the vehicle.
3. Remove the starter terminal cover.
4. Remove the terminal nut and...
Disconnect negative battery cable Disconnect the feed wire connecting the starter solenoid to the starter at the starter Remove the retaining bolts securing the starter to the bellhousing Pull the...
Brake jobs are not a job to be done without a Manual.
Your life and the lives of others and the life of your Automobile depend on them.
Please purchase a...