How to do a basic burnout?

Answer:

Answer

MANUAL SHIFT-PUT IN FIRST GEAR.REV ENGINE NICE AND HIGH.

POP THE CLUTCH .

IF IT'S AUTOMATIC TRANNY.PUT IN LOWEST DRIVE.PUT YOU FOOT ON THE BRAKE AND REV HER UP AND GIVE GAS A THE SAME TIME.

DEPENDING HOW MUCH BRAKES YOU HAVE LEFT YOU CAN SIT RIGHT WHERE YOU ARTE AND BURN BURN BURN,..

alternitively you could do the following

Front Wheel Drive Cars

  1. Put the car in first gear.
  2. Hold in the clutch.
  3. Rev. the engine.
  4. Pull on the handbrake. Alternatively, you can skip this step.
  5. Release the clutch.
  6. Move the handbrake up and down to control the burnout.
  7. To stop the burnout ease off the accelerator and free the brake.


Rear Wheel Drive Cars

  1. Do a Basic RWD Burnout.
    1. Lightly hold down the brake with your left foot.
    2. Push the accelerator until the car moves forward a tiny bit.
    3. At the same time floor the gas and press the brake harder.


Manual Rear Wheel Drive Cars

  1. Depress the clutch, and rev the engine.
  2. In one quick motion, "dump" the clutch and press the brake pedal while flooring the gas

vew my website

www.freewebs.com/sotherncountychoppers

First answer by Larry is burnout man. Last edit by Larry is burnout man. Contributor trust: 18 [recommend contributor recommended]. Question popularity: 20 [Recommended].