Answers.com > Wiki Answers > Categories > Cars & Vehicles > Auto Parts and Repairs > Brakes and Tires > Brake Pads and Rotors > How to program 1996 maxima keyless entry remote?

How to program 1996 maxima keyless entry remote?

Answer:

Answer

Try this it works for the 95 and some 96's Step 1) is to hit the lock button on the drivers door switch.(make sure door and windows are all shut. To program the remote you must insert the key into the ignition 6 to 8 times rapidly. The hazards lights will then illuminate and then you must hit the lock button on the remote. there is a slight delay but only hit the button once. keep repeating till it works.

First answer by ID0414844059. Last edit by ID0414844059. Question popularity: 43 [recommend question].

[report abuse]

Can you answer these Brake Pads and Rotors questions?

	How much to fix Honda odyssey brake pad and rotor?	Answer it!
	What causes rotors to get pitted?	Answer it!
	Is there difference between brake disc and brake rotors?	Answer it!
	Why disc brake pull to right side?	Answer it!
	Why is your right front brake grinding weeks after being replaced?	Answer it!

Relevant answers:

How do you program a remote keyless entry on a 2004 maxima?
HOW TO PROGRAM NISSAN REMOTE FOB 1. Get in & lock the doors 2. Insert the key into the ignition 6 times within 15 seconds 3. Hazard lights should flash 4. Put key back into the ignition &...
How do you program 1996 volovo 960 keyless entry remote?
Put your key into the ignition. Turn the key from "off" to the "run" position 5 times leaving it in the "run" position on the 5th time. Push any button on your remote. (If you have more than 1...
How do you program a keyless entry remote for a 1996 Chrysler sebring?
You have to go to the dealership to have your keyless remote reprogrammed. They have a scan tool to tell the computer that you are using a new key fob. I just did it to my 1997 sebring. I knew the...
Program keyless entry remotes for 1996 olds aorora?
To resynchronize the remote press and hold both the lock and unlock buttons for about 8-10 seconds. If you do it right, the horn will chirp and the lights will flash once. You have to be in range of...
How do you program a keyless entry remote for a 1996 Ford F-250?
It is necessary to have ALL (maximum of four-original and/or new) of your remote transmitters available prior to beginning this procedure To program the transmitters yourself: Insert a key in the...