It all depends on what car you have after you get all the crap off the ferunt end you should just pull or twest it off more then likely
To replace the headlight bulb: 1. Remove the headlight door. 2. Remove the four screws that hold the headlight bulb in place. 3. Pull the headlight bulb out and unplug the wire harness. Reverse the process to install the new headlight bulb.
you can go to a auto shop and buy a rx300 bulb and after you can get someone to remove the headlight and you can remove the bulb and put the new one.
All you will need to change the bulb is a screwdriver and a new bulb. Remove the headlight cover using the screwdriver and remove the burnt out bulb. Once out, you can insert a new bulb into the slot and replace the headlight cover.
No need to remove the headlight assembly. twist & remove the light bulb from the rear of the headlight assembly. Do not touch the new bulb glass with your hands. Oils from your hands will cause bulb failure.
Open Hood. Remove the cover from the headlight by prying up the keeper. Remove the metric 13 nuts holding the headlight in. Take out headlight and replace the bulb. Reinstall the headlight and reinstall headlight and cover.
Open the bonnet. Remove the grill. Remove the screws holding the headlight in. Carefully pull the headlight out. Remove the cap on the rear of the headlight.
The headlight is an assembly. To replace the headlight, you remove the bulb from the back side. It is a halogen bulb, so do not touch with bare hards before installing.
Headlight Bulb Replacement * Open the hood and locate the bulb assembly on the back of the headlight housing.On the right side headlight remove the two screws and the plastic shield for access to the bulb * Unplug the electrical connector and detach the retaining ring * Withdraw the bulb assembly from the headlight housing * Without touching the glass with your bare fingers insert the new bulb into the assembly Headlight Housing Replacement * Disconnect the negative battery cable * Remove the headlight bulb * Remove the radiator grille * Remove the parking light housing * Remove the retaining nuts and bolts detach the housing and withdraw it from the car
Headlight Bulb Replacement * Open the hood and locate the bulb assembly on the back of the headlight housing.On the right side headlight remove the two screws and the plastic shield for access to the bulb * Unplug the electrical connector and detach the retaining ring * Withdraw the bulb assembly from the headlight housing * Without touching the glass with your bare fingers insert the new bulb into the assembly Headlight Housing Replacement* Disconnect the negative battery cable * Remove the headlight bulb * Remove the radiator grille * Remove the parking light housing * Remove the retaining nuts and bolts detach the housing and withdraw it from the car
Headlight Bulb Replacement * Open the hood and locate the bulb assembly on the back of the headlight housing.On the right side headlight remove the two screws and the plastic shield for access to the bulb * Unplug the electrical connector and detach the retaining ring * Withdraw the bulb assembly from the headlight housing * Without touching the glass with your bare fingers insert the new bulb into the assembly Headlight Housing Replacement* Disconnect the negative battery cable * Remove the headlight bulb * Remove the radiator grille * Remove the parking light housing * Remove the retaining nuts and bolts detach the housing and withdraw it from the car
you need to remove the front fascia to remove the headlamp to change the bulb
Remove backing plate on headlight unit.