We have a combo Panasonic TV/VCR and the tape has gotten stuck several times. We unplugged the TV, waited a few seconds, and we replugged it in while holding the eject button at the same time on the VCR and it has worked every time. Hope it works for you.
The broadcast or cabled signal from the television is sent to the VCR to be recorded on a magnetic tape. When replayed, the VCR sends the signal back to the television. Because so much information has to be stored, the tape must pass the head of the VCR at a very high speed. As the tape passes the head, the signals are recorded in diagonal tracks across the tape.
That was a problem. You have to keep monkeying with it. Try it with the machine unplugged. Try pushing tape back in repeatedly. Try pushing tape in and down if possible. You just have to keep workign at it. unplug it, then take the srews off of the back of it which will remove the top cover off of it. then the inside of it will be exposed and you can gain easier acces in retrieving the tape and getting it out
In order to fix a VCR, you need to establish where the fault is. If you are not sure where problem is, you should allow an expert to fix it for you.
The VCR was a wonderful invention and many people enjoyed owning a vicar. The first VCR was developed by the company JVC by Yuma Shiraishi and Shizuo Takano.
Sony came out with the first VCR for home use in 1975. It was called the Betamax. A year later, JVC introduced its VHS videocassette recorder. After a several-year battle, the VHS became the VCR standard. Sony began producing VHS recorders in 1988 and produced its last Betamax in 2002. The true first VCR was invented in 1956 and was the size of a piano. The VCR was invented in 1971 along with the dot-matrix, food processor and the liquid-crystal display The VCR that we see these days was invented in 1970.
No. You need to check the manual and rewire your connections properly.
A VCR bought new will run around 100 dollars. You can probably find used ones at garage and yard sales for under 10 dollars.
Cable hookupyou can string them in order wall to cable box ( if needed ) box to vcr ( for recording ) vcr to DVD and DVD to tv. Mine is hooked up wall to box, box to splitter, splitter to tv ( I have dual tuners for pip ) then coaxial out plugs on DVD to coaxial in on tv ( I don't use a vcr any more but if I did it would be after the splitter and before the tv.) There is no need to send cable to the DVD unless it is a recorder also or if you don't have auxiliary inputs on the tv.
A VCR stand is not necessary to make a VCR working properly as it is only a piece of furniture used to hold the VCR. A VCR will work as long as it is plugged into the wall and hooked up to a TV.
You can use this Plasma TV which will work with any old VCR since you can buy and converter that you can attached to your VCR to the Plasma TV.
Most remotes will also work for VCR's, but you'll have to find the remote code for your VCR first.
Yes, as long as your VCR has an composite input. Simply plug the composite cables from your PS3 into your VCR. If you plan on playing your PS3 through your VCR this way your VCR must be turned on for it to work.
Any DVD/VCR combo with a composite out will work great with your TWC DVR.
The Toshiba DVD/VCR player and recorder will work with your Tivo, but only in analog.
Yes, the LG 42LH40 is compatible with VCR's of all kinds. It has the A/V jacks that are necessary to hook it up.
Most VCR/DVD combos come with a remote, and can be programmed to work with your TV remote.
You can always hook it up to a VCR with composite cables and it'll work just fine.
You can buy a universal remote that will work with your brand of VCR if you lose your current one.
Yes, any brand of DVD/VCR combo should work with any brand of TV as long as the TV is equipped with inputs for audio/video jacks (the white, red, and yellow jacks that come with the DVD/VCR combo player).
I bought a RCA Universal Remote Control (Model RCRN03BR) and had to use a VCR code to make this TV/VCR work.The code begins with a "2" because it is a VCR Code. TV's start with a "1".The code is 20081.With this remote, you must do the advance programming to reassign the DVD/VCR button to VCR (it defaults to DVD).Press and hold DVD/VCR button, the power button will illuminate, then press the number 2 and power light will shut off, now release DVD/VCR button and it will work!