1) Open the hood. On top of the headlight assembly are two L-shaped metal pins (they look like Allen wrenches) about 5 inches long. Unhook then and pull them straight up. This will allow you to remove the upper headlight assembly. 2) There is a plastic clip on the outboard end of the lower light assembly. Push the plastic clip outward will detach the lower light assembly, and you can pull the assembly straight out. 3) Untwist the light blub bracket counterclockwise. 4) Pull the bulb out, and replace it with a new one. 5) Reverse the process to install.
how do you replace ambient light sensor on 2002 silverado
i need to replace the temperature control light bulb on my 2004 silverado.
The first Silverado Chevy was released in 1998 and it was a light pickup truck model named GMT800 Silverado. Prior to this, the term "Silverado" was used by General Motors to refer to the trim for the Chevrolet C/K pickup trucks.
Have to replace the whole switch
This procedure is probably the same as for a 2007 GMC Sierra, which has been answered here by someone already.
Day Light Running Lights.
you have to pull the door panel and access from the inside, the lens doesnt come out from the exterior side of the door panel
http://superbrightleds.com/
remve the tail light they are on the back side.
How do your remove the lamp housing from a 2002 silverado driving lights? I can remove the upper head light housing but I can't get the driving light housing out.
pretty straight forward- locate rear of lamp hosing,twist bulb holder- remove and replace bulb= get proper ones fro dealer,they last much longer than cheapies
daytime running light module under drivers side dash