answersLogoWhite

0


Best Answer

According to the Chiltons Repair Manual, on 1986-1995 Taurus / Sables, the lower ball joint is an integral part of the lower control arm and is not replaceable - replace the lower control arm as an assembly.

Replacing the lower control arm isn't all that bad of a project...

Prep: Raise and support front end - remove wheel, caliper, rotor

* Remove 'tension strut' nut - that's the bar coming from the frame out to the middle of the lower control arm * Remove the 'pinch bolt' at the bottom of the steering knuckle holding the lower control arm / ball joint stem - it would help to open up the pinch with a small pry bar * Remove bolts from inside control arm frame mounting / pivot point Install:

* Place control arm over the end of the tension strut

* Reattach control arm to frame pivot point - torque nut to 73-97 ft. lbs. * Align the 'grove' in the ball joint stud with the pinch bolt opening -

* Line the stud up with the angle of the steering knuckle opening and insert * Insert pinch bolt and torque to 40-53 ft. lbs. * Time to put the nut and dished washer on the tension strut - dished washer facing AWAY from control arm (frontwards) - torque to 73-97 ft. lbs. Re-install caliper, rotor and don't forget the front wheel.

User Avatar

Wiki User

14y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How to replace control arm - ball joint 1986-1995 Taurus Sable?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you replace the right front wheel bearing assembly on a 2004 taurues ses?

How do you replace spark plugs on a 2004 Sable - Taurus?


Can a Ford Taurus 1992 windshield fit in to a mercury sable 1996?

No, a Generation 2 (1992-1995) Taurus/Sable Windshield will NOT fit a Generation 3 (1996-1999) Ford Taurus/Sable.


How do you replace the radio - stereo in a 1995 Sable or Taurus?

The "Related Questions" below add up to a full tutorial / how-to on installing a radio into a Taurus / Sable.Be sure to focus on the one for removing a radio from the 1986-1995 Taurus/Sable - not the other one about a converter plate as it doesn't apply to your '95.


How do you replace the headlight headlamp bulb on a 1996 1999 Mercury Sable Ford Taurus?

Ask at an auto parts store.


Where is the body control module on a 2000 Ford Taurus - Mercury Sable?

The 2000 Ford Taurus body control module is located on the firewall in the engine compartment. The module will be on the passenger side, near the bottom, of the firewall.


Will the radiator on a 1995 Ford Taurus work for a 1995 mercury sable?

99% sure the Taurus radiator will be a perfect match to the Sable's.


Is a transmission for a 2000 Taurus compatible with a 1998 Taurus?

No. 2000 Taurus and Sable are the only interchange.


Will 1997 sable rear bumper fit on 1995 sable?

No - the Taurus-Sable was significantly redesigned in 1996.


What size are the stock speakers in a 1995 Taurus - Sable?

1995 Taurus - Sable front speakers are 6.5 and back are 6 x 9


How do you replace1996 v6 Mercury Sable climate and take out the Mercury Sable control?

To replace the 1996 V6 Mercury Sable climate control and take out the old control, you will need to remove the covering below the steering wheel and dashboard. Then, access the climate control in the instrument panel and remove the old control.


Why is your 99 Taurus thermostat stuck open?

Thermostats do fail, so it's not uncommon to have to replace them. See "Related Questions" below for detailed procedures, and tips & tricks on replacing Taurus/Sable thermostats.


Replace radiator on Mercury Sable?

Depends on the model year. See "Related Questions" below for more about the first few generations of Taurus/Sables