I just changed my yesterday on my 2003 Ford Focus LX. I got a 2x4 piece of wood and a regular floor jack. What you do is stick the 2x4 on the floor jack and slide it under the car and slowly lift the engine up. Remove the 10mm bolt holding the coolant tank on, then pry the plastic tab on the strut side of the tank off the metal bracket. You will need a 15mm and a 18mm deep socket and an extension. I unbolted the two 18mm then three 15mm bolts. You'll need a breaker bar and 18mm deep socket to get the nut off the bottom of the motor mount.
About $300.
You have to take the tire off and go in from there.
I had it done at the dealer, it was $260 for front mount on passenger side.
Remove the radiator overflow resevoir(the clip will probably break, no big deal), jack the engine up a few inches with a floor jack, remove the bolts holding the motor mount on and replace.
motor mount motor mount
You need to put the car on jack-stands, remove the wheel and the splash pans, remove the bottom fastener, lift the engine and remove the mount, replace in reverse.
in removing motor mount what bolts need to be removed. This is a 1998 biuck regal 3.8L, and I am not sure how to remove the motor mount.
You can replace your 1995 Chevy Corsica motor mount by loosening the motor mount retaining bolt. Jack the engine up approximately 3 inches. Remove the motor mount retaining bolt and the motor mount bushing. Put the new motor mount bushing in and reverse the process.
Remove the old mount & replace with the new.
There is no fixing a broken motor mount. Replace them with a new ones.
You will have to replace the entire motor mount.
replace 2002 Buick rendevous motor mount