The "traceroute" program uses ICMP messaging and the time to live (TTL) field in the IP header. It works by sending a packet to the intended host with a TTL value of 1. The first router will send back the ICMP "time exceeded" message to the sending host. Then the traceroute program will send a message with a TTL of 2, then 3, etc. This way it will get information about each router using the information received in the ICMP packets. To get information about the receiving host, the message is sent to a port that is not likely to be serviced by that host. A ICMP "port unreachable" error message is generated and sent back.
try and use traceroute, before the URL address. I hope this works
In the computer and networking industry, a traceroute is used to display the path and transitioning delays for packets across an IP network. It is used on a number of systems.
tracert
Trayce-root
traceroute
The ping command. Traceroute is also useful, but I would start by using the ping command.The ping command. Traceroute is also useful, but I would start by using the ping command.The ping command. Traceroute is also useful, but I would start by using the ping command.The ping command. Traceroute is also useful, but I would start by using the ping command.
Ping and/or traceroute
traceroute [destination]
Traceroute
It was developed by Van Jacobson, an American computer scientist
Traceroute
Using the -m ttl switch of traceroute will limit the number of hops. The default is 30