With the television turned off, press mute, 1, 8, 2, power on the remote. This will put you into the service menu. Be VERY careful! only change what you understand. Click down to Hotel Mode and change it to off.
To turn off safe mode on a Samsung Galaxy Ace just turn off the phone and take out the battery. Replace the battery and turn the phone back on and it should reset it to where it is not on safe mode.
go on volume on side then keep pressing it
Go to Menu, then choose Application using left or right arrow keys, then use down arrow key to choose the Hotel mode control, "0000" is the default password, post which you can turn of the hotel mode by using the right arrow key
with tv off....mute,1,8,2 then power on and disable hotel mode Whoever answered this is incorrect. the above code sequence is for "Samsung" not LG. For LG try this: With remote press "Menu" hold down 5 seconds then enter number sequence 1105 then press enter or ok. This should bring up a service type menu. Follow the logic of the menu and turn off the hotel mode or reset the tv.
Hotel mode
From ir remote: push MENU button for 5 seconds, type 1105 and press OK. Now you have a special menu and you can modify the settings or disable hotel mode. Same procedure for come back and modify or enable hotel mode.
you turn the computer off and when u turn it on press Safe mode. you turn the computer off and when u turn it on press Safe mode.
You can't; you just have to keep the device on silent mode and only that will help.
Press and hold # key to exit or enter Silent Mode
turn off power save mode
First turn on the Dish network receiver, then press and hold the mode button on the receiver until all mode buttons light up. Next release the mode button, and the mode button will flash. Enter the Samsung code and press the pound button. Press the power button to test. If the TV and receiver does not turn off, repeat the steps and use a different code.
press # until you see "exit silent mode" , But on some phones when you have a full keyborad you have to hold down the shift button along with the # button at the same time